Surgivet® V1030 Hand-Held Pulse Oximeter

Chapter 5: Changing the Monitor’s Settings
NOTE: To exit the Setup Menu at any time, press the Exit key (
not pressing any keys.
) or wait 20 seconds while
2. Press the Menu key ( ) three (3) more times to advance to the Year Menu. dT1 will be
displayed.
3. Use the up and down arrows (no) to select the year.
Year Menu
Display: dT1 (Date Setting 1) with the current setting
Range: 00 (2000) to 99 (2099)
4. Press the Menu key ( ) again to advance to the Month Menu. dT2 will be displayed.
5. Use the up and down arrows (no) to select the month.
Month Menu
Display: dT2 (Date Setting 2) with the current setting
Range: 01 (January) to 12 (December)
6. Press the Menu key ( ) to advance to the Day Menu. dT3 will be displayed.
7. Use the up and down arrows (no) to select the day.
Day menu
Display: dT3 (Date Setting 3) with the current setting
Range: 01 to 31
8. To set the Time, press the Menu key ( ) again to advance to the Clock settings. To exit the
Setup Menu, press the Exit key ( ) or wait 20 seconds for the menu to time out.
Hours, Minutes
Hours are shown on a 24 hour clock.
To change the settings for hours and minutes:
1. Enter the Setup Menu by pressing and holding the Exit key ( ) and then pressing the Menu
key ( ).
NOTE: To exit the Setup Menu at any time, press the Exit key (
not pressing any keys.
) or wait 20 seconds while
2. Press the Menu key ( ) six (6) more times to advance to the Hour Menu. T1 will be
displayed.
3. Use the up and down arrows (no) to select the hour.
Hour Menu
Display: T1 (Time Setting 1) with the current setting
Range: 00 (midnight) to 23 (11 pm)
4. Press the Menu key ( ) again to advance to the Minute Menu. T2 will be displayed.
5. Use the up and down arrows (no) to select the minute.
Minute Menu
Display: T2 (Time Setting 2) as well as the current setting
Range: 00 to 59
6. Press the Menu key ( ) to advance to the next menu. To exit menus, press the Exit key ( )
or wait 20 seconds.
5-4 Veterinary V1030 Hand-Held Pulse Oximeter Operation Manual