Surgivet® V1030 Hand-Held Pulse Oximeter

Chapter 8: Optional Docking Station and Printer
Chapter 8: Optional Docking Station and Printer
Description
Figure 8-1: Docking Station with Printer Attached
The WW1025 Docking Station serves many purposes depending on individual needs and
selection of optional equipment. The Docking Station is powered by the WW1095 AC Power
Supply, which can power the oximeter and operate the printer while charging the internal and
spare battery packs.
The Docking Station:
• Provides a convenient and secure “home base” for the V1030 oximeter.
• Recharges WW1090 Lithium-Ion (Li+) rechargeable battery pack installed in the oximeter.
• Recharges an additional WW1090 Lithium-Ion (Li+) rechargeable battery pack stored in the
Docking Station.
• May be equipped with a WW1026 thermal printer.
CAUTION! If the docking station’s electrical connectors are damaged, operating the dock
with or without the oximeter may cause overheating and equipment damage.
Remove all power from the docking station and contact your authorized service
representative.
Veterinary V1030 Hand-Held Pulse Oximeter Operation Manual 8-1