Literature Review on Building Envelope, Heating and ... - Beeshive.org

More documents

Recommendations

Info

Ninomura, P.T. and R. Bhargava. 1995. “Heat Recovery Ventilators in Multifamily Residences in the Arctic.” Pp. 961-966 in ASHRAE-Transactions. 101(2), ASHRAE, Atlanta, GA. NoRTH (Northern Research and Technology). nd. Web site. . NWT (Northwest Territories). 2000. Good Building Practice for Northern Facilities. First Edition, March 2000, Department of Public Works and Services, Government of the Northwest Territories, Yellowknife, NT, Canada X1A 2L9. Nunavut Housing Corporation. 2005. Personnel communication, June. Pathak, R.C. 1996. “Constructional and Environmental Aspects of Structural Materials at Antarctica and Indian Himalayas.” Pp. 968-077 in Proceedings of the 1996 4th Materials Engineering Conference, Part 2 (of 2). Washington, DC. Penner, E. 1962. “Ground Freezing and Frost Heaving.” Canadian Building Digest. CBD-26, Institute for Research in Construction, National Research Council, Ottawa, Ontario, February, 6 p. . Penner, E. and K.N. Burn. 1970. “Adfreezing and Frost Heaving of Foundations.” Canadian Building Digest. CBD-128, Institute for Research in Construction, National Research Council, Ottawa, Ontario, August, 8 p. . Quimby, T.B. 1998. “Air-Formed Concrete Shells for Cold Regions.” Pp. 558-567 in Proceedings of the Ninth International Conference on Cold-Regions Engineering. Duluth, Minnesota, USA, September 27-30. Rand, J.H. and F. Brier. 2000. “SPRP Project: An Overview.” Civil Engineering. 70(12) (December): 34-37, 73. Rieger, T. and J. Byrne. 1996. “Off-Grid in a Cold City: The Alberta Sustainable Home.” Home Energy Magazine Online. Vol. 13 ; Issue 2, March/April, pp. 37-40. A PDF copy is posted on (Accessed December 10, 2006). Rogers, T.S. 1951. Design of Insulated Buildings for Various Climates. F.W. Dodge Corporation, New York, 119 p. Sandberg, P. and J. Nieminen. 1997. “Steel Houses in a Cold Climate.” Pp. 427-438 in Proceedings of the Jerkontoret-Anniversary Conference, 250th. Stockholm, Sweden, June. Schmidt, D. and G. Jóhannesson. 2001. “Model for the Thermal Performance of a Double Air Gap Wall Construction.” Nordic Journal of Building Physics. Vol. 2, 20 p. PERD-079: Task 2 - <strong>Literature</strong> <strong>Review</strong> 106
, then select “Volume 2, 1999-2001” to view the volume contents. Seifert, R. nd. “Attics Roofs for Northern Residential Construction.” The Northern Research and Technology in Housing (NoRTH) Web site. < www.northrthn.org/FactSheets/Attics-roofs.html>. Sherwood, G.E. 1983. “Condensation Potential in High Thermal Performance Walls – Cold Winter Climate.” United States Department of Agriculture, Forest Service, Research Paper FPL-433, May, 20 p. Strub, H. 1996. Bare Poles: Building Design for High Latitude. Carleton University Press. 194 p. Sugawara, M. and A. Hoyano. 1996. “Development of a Natural Ventilation System Using a Pitched Roof of Breathing Walls.” Pp. 717-722 in Proceedings of the 7th International Conference on Indoor Air Quality and Climate – Indoor Air 96. Volume. 3. ———. 1997. “Conception of a Wall Structure for a Passive System and a Concrete Proposal.” Pp. 1-187-1-194 in Proceedings of the 14th Passive and Low Energy Architecture-International Conference. Kushiro, Japan, January. Thue, J.V., H.B. Skogstad, and A. Homb. 1996. “Wood Frame Walls in Cold Climate - Vapour Barrier Requirements.” Journal of Thermal Insulation and Building Envelopes. 20 (July): 63-75. Waechter, B.F. and C.J. Williams. 1999. “Snowdrift Design Guidance for the New South Pole Station.” Pp. 57-68 in Proceedings of the 10th International Conference on Gold Regions Engineering Putting Research into Practice. Lincoln, NH. Whalen, J. 2004. “SIPs and ICFs – Energy-Efficient Building Systems Using EPS Insulation.” Construction Canada. (July): 24-30. Wilson, A.G. 1960. “Condensation on Inside Window Surfaces.” CBD-4, Institute for Research in Construction, National Research Council, Ottawa, Ontario, April, 5 p. Wikipedia. nd. Passive house. From the free encyclopedia Wikipedia, web site. (Accessed November 29, 2006) Yoshino, H. 1991. “Design Strategies for Houses in Cold-Climate Regions of Japan.” Pp. 625-634 in ASHRAE Transactions. 97(1), ASHRAE Winter Meeting - Technical Papers, New York, NY, USA, ASHRAE, Atlanta, GA. PERD-079: Task 2 - <strong>Literature</strong> <strong>Review</strong> 107
Page 1 and 2:
http://irc.nrc-cnrc.gc.ca Task 2: <
Page 3 and 4:
DISCLAIMER This report presents a r
Page 5 and 6:
3. Heating, Ventilation, and Energy
Page 7 and 8:
List of Acronyms ach Air changes pe
Page 9 and 10:
Executive Summary Canada’s region
Page 11 and 12:
to 24 in.) in areas below the tree
Page 13 and 14:
1. Introduction Background Canada
Page 15 and 16:
Moisture Issues: Wood Frame Constru
Page 17 and 18:
of Alaska museum where RH was 45%.
Page 19 and 20:
Let Z w is warm side vapour resista
Page 21 and 22:
c) Proposed Wall # 2 b) Proposed Wa
Page 23 and 24:
Canada Mortgage and Housing Corpora
Page 25 and 26:
Upgraded Thermal & Air Tightness Wa
Page 27 and 28:
Single Stud Walls with Interior Str
Page 29 and 30:
Standoff wall system Source: CHBA (
Page 31 and 32:
• polyethylene air/vapour barrier
Page 33 and 34:
Building Envelopes: Northern Canada
Page 35 and 36:
• Climate: The Arctic climate in
Page 37 and 38:
• Plumbing system: To solve conde
Page 39 and 40:
• The SIP house required 264 hour
Page 41 and 42:
• The attached sunspace did not p
Page 43 and 44:
this case, a means of venting the r
Page 45 and 46:
• High energy and transportation
Page 47 and 48:
as well as at high altitudes, where
Page 49 and 50:
Foundation construction in the perm
Page 51 and 52:
oof assemblies, because the roof de
Page 53 and 54:
• The roofing membrane, air/vapou
Page 55 and 56:
• the coasts and islands with the
Page 57 and 58:
Maritime Climate Indigenous Archite
Page 59 and 60:
example, in cold climates, the comf
Page 61 and 62:
Globally, domes constructed with ai
Page 63 and 64:
time limitations existed for the bu
Page 65 and 66:
Pier Foundation System Brooks (2000
Page 67 and 68: Kwok et al. (1992, 1993) also used
Page 69 and 70: Composite-Wrapped Concrete Column K
Page 71 and 72: consumption and CO 2 emissions asso
Page 73 and 74: healthy, sustainable, durable, and
Page 75 and 76: Triple-glazed windows (about RSI-0.
Page 77 and 78: The building envelope is airtight a
Page 79 and 80: Maximum annual heating requirement
Page 81 and 82: Energy Performance During the first
Page 83 and 84: Roof framing Roof insulation Air ti
Page 85 and 86: Table 8 compares R-values and air t
Page 87 and 88: in.) diameter, it appears quite whi
Page 89 and 90: • an equivalent thermal transmitt
Page 91 and 92: 3. Heating, Ventilation, and Energy
Page 93 and 94: Locations that Work Well For buildi
Page 95 and 96: District Heating Considerations Arm
Page 97 and 98: • Particulates: the measured leve
Page 99 and 100: 4. Socio-Economic Issues The Vegeta
Page 101 and 102: concentrated in a few integrated sp
Page 103 and 104: Snow drifting patterns, winds, temp
Page 105 and 106: Thermally Upgraded Wall Systems Thi
Page 107 and 108: Coastal Northern Regions For high-m
Page 109 and 110: Appendix A: Literature</str
Page 111 and 112: References Note: Unless otherwise i
Page 113 and 114: ———. 1994-1. “Designing Hou
Page 115 and 116: Diakun, D. 1997. “Portfolio: Nort
Page 117: Legget, R.F. and C.B. Crawford. 196
show all

Literature Review on Building Envelope, Heating and ... - Beeshive.org

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?