Computrac MAX-1000 User's Manual - Arizona Instrument

! RESULT DISPLAY OPTIONSTest results can be displayed as apercentage of weight lost during the test(Moisture), percentage weight remainingafter the test (Solids), or as a dry weight(Dry Wt) basis value. Dry weight basis isthe weight loss divided by the weightremaining at the end of the test. Note thatthe dry weight value ratio can exceed unity(one), and often does in certainapplications such as soil and paper. Toprogram in the desired results, “Selct” theFigure 34 RESULT DISPLAY OPTIONSRESULT DISPLAY OPTIONS andtoggle through the options until the correct one is displayed. Use the “Quit” and“Esc” keys to save and leave the menu.7.2.2 REORDER MEMORY STARTThis copies a stored parameter set to another position in the list. If you copy a setover an existing set, the old set is written over and cannot be recovered. Be careful!To quickly create a new set similar to an old one, use REORDER to copy the oldone to a blank location, then use ADD/EDIT to enter the new name and changedvalues.7.2.3 DELETE MEMORY STARTThis command removes a stored set of parameters. Remember to use this carefullyas the information can not be retrieved. The weight and tartrate tests are notaffected by this option.7.2.4 PRINT MEMORY STARTThis command prints the stored parameters. All 7 (00 to 07) of the numberedMemory Start Sets are printed, giving the values of the parameters shown below inthe print out example.COMPUTRAC MAX1000 MEMORY START REPORT# ID TST IDL HST SSZ SWN MODE RY RATE00 WEIGHT 105 025 025 8.0 1.0 PRED 1.0001 TARTRATE 150 100 025 8.0 1.0 RATE 0.0302 TEST 120 050 025 5.0 1.0 PRED 0003 090 050 025 3.0 1.0 PRED 0004 145 050 025 2.0 1.0 PRED 0005 125 050 025 2.0 1.0 RATE 1.1006 CUSTOM 160 025 025 8.0 1.0 PRED 00Page # 0135