Computrac MAX-1000 User's Manual - Arizona Instrument

tags entered by the operator to identify a test, or set oftests, for reporting purposes.DATE:Date of the test.TIME OF DAY: Time of the test.FINAL RESULT: Test result value.RESULT TYPE: Moisture, solids or dry weight basis.TEST MODE: Ending criteria used for this test.START WT: Sample basis weight.END WT:Sample weight at the end of the test.TEST TIME: Minutes and seconds the test was in progress.START TEMP: Temperature of the chamber when the test started.TEST TEMP: Test setpoint temperature.HISTART TEMP: HiStart temperature setpoint.PAN TARE: Pan tare setting.SAMPLE TARE: Sample tare setting.SAMPLE CENTER: Nominal load weight.SAMPLE WINDOW: Acceptable load weight.END REL: Reliability ending criterion value at the end of the test.REL TGT: Target reliability used for PREDICTION ending criteria.END STAB: Stability ending criterion value at the end of the test.STAB TGT: Target stability used for PREDICTION ending criteria.END RATE: Rate ending criterion value at the end of the test.RATE TGT: Target rate used for RATE ending criteria.To change any of the optional items,move the selector bar to the itemwanted. To change the option, press thekey marked “Toggle.” When finished,press the key marked “Esc.” The newselections are now stored in the system.! ENTER/EDIT COMPANY NAMEThis function allows report headers to becustomized, to show the name of the testlocation, or other alphanumeric material.The default value is ARIZONAINSTRUMENT CORP.Figure 47 ENTER/EDIT CO. NAMEOnce this option has been selected, the left, right, up and down arrows are used toposition the cursor and change the letters or numbers. The alphanumeric labelcontains up to 22 positions and can be changed with the arrow keys. Pressing“Incr” starts at "A" and continues through the alphabet, the numbers, then thesymbols. “Decr” starts at the bottom, displaying the symbols first, etc. Select theitem to be edited with the up and down arrow keys, and press “Edit.” Press “Quit”when editing is complete41