Computrac MAX-1000 User's Manual - Arizona Instrument

! REPORT CONTROL OPTIONSThis screen controls output to the printer and the RS-232 port. It also controlshow often the instrument sends data.To select this option, move the selectorbar in the SETUP REPORT to REPORTCONTROL OPTIONS, then press a keylabeled “Selct.” This begins the reportcontrol change process. The selector barwill be positioned on the last optionchanged. To change this option, press“Edit” or “Toggle,” or to change adifferent option, move the selector bar toit and press “Edit.” The availableREPORT CONTROL OPTIONS are:Figure 45 REPORT CONTROLREPORT ENABLED:YES or NO.REPORT START:START TEST, 1st PRED (first prediction), or TEST END. IfTEST END is selected, real time data will not be printed during the test.REPORT INTERVAL:Minimum of 02 seconds to the maximum of 99 seconds.To store the new values:Press “Esc.”! REPORT ITEMS TO PRINTThe MAX-1000 can store the mostrecent test result in memory. These testresult is available for printing. To changethe stored items, select REPORTITEMS TO PRINT and press the “Selct”key.The options available on the REPORTITEMS TO PRINT screen are:Figure 46 ITEMS TO PRINTMEMORY SELCT:SAMPLE NAME:LOT NUMBER:PRODUCT ID:Number of the memory start parameter set in effect for thistest.Identification tag for the parameter set used.Identification tag for the lot of material to be tested now.Identification tag for the product in this lot of testedmaterial. Lot number and product ID are alphanumeric40