Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
26 3 Windows Configuration<br />
Figure 8. “Port Settings” Screen<br />
12. On <strong>the</strong> “Port Settings” screen shown above:<br />
• Select LPR in <strong>the</strong> “Pro<strong>to</strong>col” section.<br />
• Enter a queue name (L1 for <strong>the</strong> USB port).<br />
• Ensure <strong>the</strong> LPR Byte Counting Enabled setting is enabled.<br />
• Click OK <strong>to</strong> confirm your changes and <strong>to</strong> close this screen.<br />
13. Follow <strong>the</strong> instructions <strong>to</strong> complete <strong>the</strong> wizard.<br />
Windows 9x/Me Setup<br />
Before performing <strong>the</strong> following procedure, <strong>the</strong> <strong>SysKonnect</strong> <strong>SK</strong>-<strong>54P1</strong> <strong>802.11g</strong> <strong>Wireless</strong> <strong>Print</strong><br />
<strong>Server</strong> must be installed on your LAN, and configured as described in chapter 2 "Installation"<br />
on page 17. Both <strong>the</strong> <strong>SysKonnect</strong> <strong>SK</strong>-<strong>54P1</strong> <strong>802.11g</strong> <strong>Wireless</strong> <strong>Print</strong> <strong>Server</strong> and <strong>the</strong> attached<br />
printer should be powered on.<br />
1. Insert <strong>the</strong> supplied CD-ROM in<strong>to</strong> your drive.<br />
The “<strong>Print</strong> <strong>Server</strong> Installation” screen is displayed.<br />
)
Change language