Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
74 9 Special Features<br />
Installing using<br />
IPP_CLIENT.EXE<br />
To install an IPP client server using IPP_client.exe, proceed as follows:<br />
1. Run this program <strong>to</strong> unzip <strong>the</strong> included files.<br />
The IPP setup program will <strong>the</strong>n run.<br />
2. Follow <strong>the</strong> instructions <strong>to</strong> complete <strong>the</strong> installation.<br />
IPP Client Configuration<br />
1. Run <strong>the</strong> “Add IPP Port” program entry created by <strong>the</strong> installation.<br />
A screen like <strong>the</strong> following will be displayed:<br />
Figure 43. IPP Port<br />
2. If Internet access from your location is via a proxy server, check ACCESS IPP SERVER VIA<br />
PROXY SERVER.<br />
3. Enter details of your proxy server. (This will be <strong>the</strong> same as your browser configuration.)<br />
4. Enter <strong>the</strong> IP address or URL of <strong>the</strong> IPP server.<br />
5. Click SELECT DEVICE PORT <strong>to</strong> view <strong>the</strong> available ports on <strong>the</strong> IPP server.<br />
6. Select <strong>the</strong> appropriate port.<br />
A connection <strong>to</strong> <strong>the</strong> IPP server will be established at this time.<br />
7. Click SAVE <strong>to</strong> create <strong>the</strong> IPP port on your system.<br />
A screen which confirms that <strong>the</strong> port has been created is displayed:
Change language