Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server

32 3 Windows Configuration
Figure 15. Install SMB Printer
7. Follow the instructions to complete the installation.
• For information about the question "Do you print from MS-DOS programs?", see
section "Printing from MS-DOS programs" on page 91.
• Select the printer manufacturer and model to match the printer connected to this port
on the SysKonnect SK-54P1 802.11g Wireless Print Server and complete the wizard.
This printer will now appear in your printers folder (START > SETTINGS > PRINTERS) and can be
used like any other printer. However, SMB printing is not suitable for large complex print jobs.
You should use the peer-to-peer printing instead.
Windows with Server-based Print Queues
With a server-based print queue, the SysKonnect SK-54P1 802.11g Wireless Print Server is
installed on an existing network server (Windows, Unix, or NetWare), rather than on your PC.
If your network administrator uses this system, each Windows client must be set up as follows:
1. Open your printers folder.
2. Double-click the ADD PRINTER button to start the “Add Printer” wizard.
3. When prompted, select NETWORK PRINTER.
4. If you are asked for the network path or the queue name, do the following:
• On Windows 98/Me, click the BROWSE button, as seen in figure 16.
• On Windows 2000/XP, leave the field blank and click NEXT, as seen in figure 17.