Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Connection to the SysKonnect SK-54P1 802.11g Wireless Print Server
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Windows <strong>Print</strong>ing Problems 87<br />
<strong>SysKonnect</strong> <strong>SK</strong>-<strong>54P1</strong> <strong>802.11g</strong> <strong>Wireless</strong> <strong>Print</strong> <strong>Server</strong><br />
Problem Solution<br />
The printer wizard will display a message stating<br />
that "The Network <strong>Print</strong>er is off-line". This is OK.<br />
5. Continue <strong>the</strong> “Add <strong>Print</strong>er” wizard until finished.<br />
6. If requested about sharing <strong>the</strong> printer, do not enable<br />
SHARING.<br />
7. Go <strong>to</strong> <strong>the</strong> “<strong>Print</strong>ers” folder (CONTROL PANEL – PRINT-<br />
ERS).<br />
The printer icon will be grayed out indicating <strong>the</strong><br />
printer is not ready.<br />
8. Right-click <strong>the</strong> printer.<br />
9. Select PROPERTIES.<br />
10. Select <strong>the</strong> DETAILS tab, as shown below.<br />
11. Click <strong>the</strong> ADD PORT but<strong>to</strong>n.<br />
Figure 51. “Details” Tab
Change language