Understanding Smart Sensors - Nomads.usp

Mechatronics and Sensing Systems 271[11] Massie, M. “Neuromorphic Sensor Mimics the Human Eye,” EDN Products Edition, Jan.17, 1994, p. 34.[12] Yates, W., “Test Chips Detect Semiconductor Problems,” Electronic Products, Sept. 1991,pp. 17–18.[13] D. L. Polla, and R. S. Muller, “Integrated Multisensor Chip,” IEEE Electron Device Newsletter,Vol. EDL-7, No. 4, Apr. 1986, pp. 254–256.[14] Ried, R. P., et al., “Piezoelectric Microphone With On-Chip CMOS Circuits,” IEEE J.Microelectromechanical Systems, Vol. 2, No. 3, Sept. 1993, pp. 111–120.[15] Maliniak, D. “Smart Batteries Spelled Out by Joint Enabling Specification,” ElectronicDesign, June 13, 1994, p. 50.[16] Jones, S. D., and J. R. Akridge, “Microfabricated Solid-State Secondary Batteries forMicrosensors,” Proc. Sensors Expo, Cleveland, Sept. 20–22, 1994, pp. 215–223.[17] Madou, M., et al., “Carbon Micromachining C-MEMS,” Proc. Symp. on Chemical andBiological Sensors and Analytical Electromechanical Methods, Pennington, NJ, 1997, pp.61–69.[18] DeJule, R., “Flat Panel Technologies,” Semiconductor International, Jan. 1997, pp. 59–66.[19] White, D., “Electromagnetic Compatibility: What Is It? Why Is It Needed?” Instrument &Control Systems, Jan. 1995, pp. 65–74.[20] SAE Handbook, Vol. 2, Parts and Components, Warrendale, PA, 1995.[21] Mladenovic, D., R. Verma, and R. Frank, “EMC Considerations for Automotive Sensors,”SAE Internat’l Congress & Expo, SAE 970850, Detroit, Feb. 24–27, 1997.