XProtect Express 1.1; Administrator's Manual - Milestone

Milestone XProtect ® Express 1.1Administrator's ManualNameButtonDescriptionDescriptionMoves the flattened view upMoves the flattened view up and to the leftMoves the flattened view up and to the rightMoves the flattened view to the leftMoves the flattened view to its home position (that is default position)Moves the flattened view to the rightMoves the flattened view down and to the leftMoves the flattened view downMoves the flattened view down and to the rightZooms out (one zoom level per click)Zooms in (one zoom level per click)PTZ preset positionsPTZ-related properties are only available when you are dealing with a PTZ (Pan/Tilt/Zoom) camera. PTZ presetpositions can be used for making the PTZ camera automatically go to a particular position when particular eventsoccur, and when setting up PTZ patrolling profiles. Preset positions also become selectable in clients, allowingusers with required rights (see "Configure user and group rights" on page 140) to move the PTZ camera betweenpreset positions.Names of preset positions must contain only the characters A-Z, a-z and the digits 0-9. If you import presetpositions from cameras (see the following), verify that their names do not contain other characters. If they do,change the preset position names before you import them.Restart services (see "Start and stop services" on page 144) after having made changes to PTZ settings.Cameras that do not support multiple simultaneous video streams cannot connect to the surveillance server andthe Management Application at the same time. Therefore, we recommended stopping (see "Start and stopservices" on page 144) the Recording Server service when configuring such devices for motion detection andPTZ. See also View video from cameras in Management Application (on page 167).www.milestonesys.com 105 Advanced configuration