XProtect Express 1.1; Administrator's Manual - Milestone

Milestone XProtect ® Express 1.1Administrator's ManualConfigure when cameras should do whatUse the scheduling feature to configure when:Cameras should be online (that is transfer video to XProtect Express)Cameras should use speedup (that is use a higher than normal frame rate)You want to receive any e-mail notifications regarding camerasConfigure camera-specific schedulesIf you base your schedule profile—or parts of it—on events within periods of time, remember to select Start eventand Stop event from the lists below the calendar section.Tip: If you have not yet defined any suitable events, you can quickly do it: Use the Configure events list, locatedbelow the other fields.The fact that a camera transfers video to XProtect Express does not necessarily mean that video from the camerais recorded. Recording is configured separately; see Configure video and recording (see "About video andrecording configuration" on page 75).For each camera, you can create schedule profiles based on:Online periodsPeriods of time (example: Mondays from 08.30 until 17.45), shown in pink: Events within periods of time (example: from Event A occurs until Event B occurs Mondays from 08.30until 17.45), shown in yellow:The two options can be combined, but they cannot overlap in time.SpeedupPeriods of time (example: Mondays from 08.30 until 17.45), shown in olive green:E-mail notificationPeriods of time (example: Mondays from 08.30 until 17.45), shown in blue:XProtect Express comes with two simple schedule profiles, Always on and Always off, which cannot be editedor deleted. If these do not meet your needs, you can create any number of customized schedule profiles for eachwww.milestonesys.com 77 Advanced configuration