XProtect Express 1.1; Administrator's Manual - Milestone

Milestone XProtect ® Express 1.1Administrator's ManualNameDescriptionSelect check box to include still images in e-mail notifications. Whenselected, a still JPEG image from the time the triggering event occurred willbe attached to each e-mail notification.Include ImageExample of e-mail including a still imageDo not send e-mail on camerafailuresTime between motion- anddatabase-related e-mails percameraSender e-mail addressOutgoing mail (SMTP) servernameServer requires loginIf selected, e-mail notifications will not be sent if XProtect Express losescontact with a camera. Otherwise, automatic e-mail notifications will besent in such cases, regardless of any scheduled e-mail notification periods(see "E-mail notification" on page 127).Minimum time (in minutes) to pass between the sending of each e-mailnotification per camera. This interval only applies for e-mail notificationgenerated by detected motion or database-related events; e-mailnotification generated by other types of events will still be sent outwhenever the events occur. Examples: If specifying 5, a minimum of fiveminutes will pass between the sending of each motion- or database-relatede-mail notification per camera, even if motion or database events aredetected in between. If specifying 0, e-mail notifications will be sent eachtime motion or database events are detected, potentially resulting in a verylarge number of e-mail notifications being sent. If using the value 0, youshould therefore consider cameras' motion detection (see "Motion detection& exclude regions" on page 101) sensitivity settings.Enter the e-mail address you wish to appear as the sender of the e-mailnotification.Type the name of the SMTP (Simple Mail Transfer Protocol) server whichwill be used for sending the e-mail notifications. Compared with other mailtransfer methods, SMTP has the advantage that you will avoidautomatically triggered warnings from your e-mail client. Such warningsmay otherwise inform you that your e-mail client is trying to automaticallysend e-mail messages on your behalf.TLS (Transport Layer Security) and it s predecessor SSL (Secure SocketLayer) is not supported; if the sender belongs on a server that requires TLSor SSL, e-mail notifications will not work properly. Also, you may berequired to disable any e-mail scanners that could prevent the applicationsending the e-mail notifications.Select check box if a user name and password is required to use the SMTPserver.www.milestonesys.com 133 Advanced configuration