XProtect Express 1.1; Administrator's Manual - Milestone

More documents

Recommendations

Info

Milestone XProtect ® Express 1.1Administrator's ManualNameSetupEdit shared viewsEdit private viewsAdministrator AccessDescriptionAbility to access setup mode in the Smart Client.Tip: By clearing the Live, Playback and Setup check boxes you caneffectively disable the user's/group's ability to use the Smart Client. Youcan use this as a temporary alternative to deleting the user/group, forexample while a user is on vacation.Ability to create and edit views in shared groups in the Smart Client. Viewsplaced in shared groups can be accessed by every user. If a user/groupdoes not have this right, shared groups will be protected, indicated by apadlock icon in the Smart Client.Ability to create and edit views in private groups in the Smart Client. Viewsplaced in private groups can only be accessed by the user who createdthem. If a user/group does not have this right, private groups will beprotected, indicated by a padlock icon in the Smart Client. Denying usersthe right to create their own views may make sense in some cases; forexample in order to limit bandwidth use.For more information about shared and private views, see the separateSmart Client documentation.Ability to access and work with the Management Application. Selected andnon-editable for Administrators (see "Overview of users and groups" onpage 140). Cleared and selectable for all other users.Camera accessWhen you add or edit basic users (see "Add basic users" on page 138), Windows users (see "Add Windowsusers" on page 139) or groups (see "Add user groups" on page 139), you can specify camera access settings:In the list of cameras, select the camera(s) you want to work with. Note the last item in the list, Rights for newcameras when added to the system, with which you can allow the user/group access to any future cameras.Tip: If the same features should be accessible for several cameras, you can select multiple cameras by pressingSHIFT or CTRL on your keyboard while selecting.For the selected camera(s), in the Access check box, specify if the user/group should have access to live viewingand playback at all. If so, specify if they should have access to both live viewing and playback and—if this is thecase—which sub-features should be available when working with the selected camera(s).The sub-features are listed in two columns in the lower part of the window: the left column lists features related tolive viewing, the right column lists features related to playback.The Camera access settings check boxes work like a hierarchy of rights. If the Access check box is cleared,everything else is cleared and disabled. If the Access check box is selected, but, for example, the Live check boxis cleared, everything under the Live check box is cleared and disabled.Depending on the selected column, the following default features for live or playback from the selected camera(s)will give you the ability to:LivePTZFeaturesUse navigation features for PTZ (Pan/Tilt/Zoom) cameras.A user/group will only be able to use this right if the user has access to oneor more PTZ cameras.www.milestonesys.com 142 Advanced configuration
Milestone XProtect ® Express 1.1Administrator's ManualLivePTZ preset positionsOutputEventsIncoming audioManual recordingPlaybackFeaturesUse navigation features for moving a PTZ camera to particular presetpositions. A user/group will only be able to use this right if having access toone or more PTZ cameras with defined preset positions.Activate output (lights, sirens, door openers, etc.) related to the selectedcamera(s).Use manually triggered events related to the selected camera(s). Thisfeature is available in the XProtect Smart Client only.Listen to incoming audio from microphones related to the selectedcamera(s). This feature is available in the Smart Client only.Manually start recording for a fixed time (defined (see "Manual recording"on page 85) by the surveillance system administrator).FeaturesAVI/JPEG exportDatabase exportSequencesSmart searchRecorded audioExport evidence as movie clips in AVI format and as still images in JPEGformat.Export evidence in database format. This feature is available in the SmartClient only.Use the Sequences feature when playing back video from the selectedcamera.Use the smart search feature, with which users can search for motion inone or more selected areas of images from the selected camera. Thisfeature is available in XProtect Smart Client only.Listen to recorded audio from microphones related to the selectedcamera(s).You cannot select a feature, if the selected camera does not support the relevant feature. For example, PTZrelatedrights are only available if the relevant camera is a PTZ camera. Some features depend on theuser’s/group’s General Access (on page 141) properties.Square-filled check boxes can appear in the lower part of the window if you have selected several cameras and afeature applies for some but not all of the cameras. Example: For camera A, you have selected that use of theEvents is allowed, for camera B, you have not allowed this. If you select both camera A and camera B in the list,the Events check box in the lower part of the window will be square-filled. Another example: Camera C is a PTZcamera for which you have allowed the PTZ preset positions feature whereas camera D is not a PTZ camera. Ifyou select both camera C and camera D in the list, the PTZ preset positions check box will be square-filled.ServicesAbout servicesThe following services are all automatically installed on the XProtect Express server if you run a Typicalinstallation. By default, services run transparently in the background on the XProtect Express server. If you needto, you can start and stop services separately from the Management Application, see Start and stop services (onpage 144).www.milestonesys.com 143 Advanced configuration
Page 1 and 2:
Milestone SystemsXProtect ® Expres
Page 3 and 4:
Milestone XProtect ® Express 1.1Ad
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 18 and 19:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92: Milestone XProtect ® Express 1.1Ad
Page 141: Milestone XProtect ® Express 1.1Ad
Page 183: About Milestone SystemsFounded in 1
show all

XProtect Express 1.1; Administrator's Manual - Milestone

Create successful ePaper yourself

Delete template?

Save as template?