XProtect Express 1.1; Administrator's Manual - Milestone

Milestone XProtect ® Express 1.1Administrator's ManualConfigure User Access wizardThe Configure User Access wizard helps you quickly configure clients' access to the XProtect Express server aswell as which users should be able to use clients. The access summary at the end of the wizard lists the camerasyour users have access to.When you use the wizard, all users you add will have access to all cameras, including any new cameras added ata later stage. You can however, specify access settings, users and user rights (see "Configure user and grouprights" on page 140) separately. see Configure server access (on page 135). You cannot add users to groups(see "Add user groups" on page 139) through the wizard.Pages in this wizard:Server access settings ........................................................................................ 67Basic & Windows Users ...................................................................................... 67Configure User Access wizard: access summary ................................................ 68Server access settingsNameServer nameLocal portCharacter encoding/LanguageInternet accessInternet addressInternet portDescriptionName of the XProtect Express server as it will appear in clients. Clientusers with rights to configure their clients will see the name of the serverwhen they create views in their clients.Port number to use for communication between clients and the surveillanceserver. The default port number is 80; you can change the port number ifport 80 is used for other purposes in your organization.Select required language/character set.Example: If the surveillance server runs a Japanese version of Windows,select Japanese. Provided access clients also use a Japanese version ofWindows, this will ensure that the correct language and character encodingis used in clients' communication with the server.Select if you want the server to be accessible from the internet through arouter or firewall. If you select this option, you must also specify the public(“outside”) IP address and port number in the following fields. When usingpublic access, the router or firewall must be configured so requests sent tothe public IP address and port are forwarded to the local (“inside”) IPaddress and port of the XProtect Express server.Lets you specify a public IP address or hostname for use when theXProtect Express server should be available from the internet.Specify a port number for use when the XProtect Express should beavailable from the Internet. The default port number is 80. You can changethe port number if needed.Basic & Windows UsersYou can add client users in two ways, which may be combined.www.milestonesys.com 67 Wizards