XProtect Express 1.1; Administrator's Manual - Milestone

Milestone XProtect ® Express 1.1Administrator's Manualprofiles for each camera. When you create a customized schedule profile for one camera, you can reuseit with other cameras if required.4. Save your configuration changes by clicking the Save Configuration button on the ManagementApplication toolbar.When archiving, disable any virus scanning (see "Virus scanning information" on page 30) of cameradatabases and archiving locations.General scheduling propertiesProperties in this window:Scheduling All Cameras .................................................................................... 124Scheduling options ............................................................................................ 125Archiving ............................................................................................................ 126Scheduling All CamerasWhen you configure general scheduling and archiving (see "Configure general scheduling and archiving" on page123), you can specify certain properties for many cameras in one go. Either in order to speed up things, orbecause the properties in question are shared by all cameras rather than being specific to individual cameras.All properties on a white background are editable, properties on a light blue background cannot be edited. Notethat the properties Online Period, Speedup, E-mail Notification can also be specified individually for eachcamera.NameTemplateApply TemplateCameraOnlineDescriptionThe template can help you configure similar properties quickly. Say youhave 20 cameras and you want to change the recording path, archivingpath, and retention time for all of them. Instead of having to enter the samethree pieces of information 20 times, you can simply enter them once in thetemplate, and then apply the template to the 20 cameras with only twoclicks.Select which cameras you want to apply the template for. You then use oneof the two Set buttons to actually apply the template.Tip: To select all cameras in the list, click the Select All button.The name as it appears in the Management Application as well as inclients.Select the required profile (for example Always on) for the online schedulefor the camera(s) in question.You specify a camera's online periods by creating schedule profiles basedon:Periods of time (example: Mondays from 08.30 until 17.45), shownin pink:Events within periods of time (example: from Event A occurs untilEvent B occurs Mondays from 08.30 until 17.45), shown in yellow:The two options can be combinedtime., but they cannot overlap inwww.milestonesys.com 124 Advanced configuration