XProtect Express 1.1; Administrator's Manual - Milestone

Milestone XProtect ® Express 1.1Administrator's ManualNameTemplateApply TemplateSelect AllClear AllSet selected template value onselected camerasSet all template values onselected camerasCamera NameDescriptionThe template can help you configure similar properties quickly. Say youhave 20 cameras and you want to change the recording path, archivingpath, and retention time for all of them. Instead of having to enter the samethree pieces of information 20 times, you can simply enter them once in thetemplate, and then apply the template to the 20 cameras with only twoclicks.Select which cameras you want to apply the template for. You then use oneof the two Set buttons to actually apply the template.Tip: To select all cameras in the list, click the Select All button.Click button to select all cameras in the Apply Template column.Click button to clear all selections in the Apply Template column.Apply only a selected value from the template to selected cameras.Tip: To select more than one value press CTRL while selecting.Apply all values from the template to selected cameras.The name as it appears in the Management Application as well as inclients. You can overwrite the existing name with a new one. Names mustbe unique, and must not contain any of these special characters: < > & '" \ / : * ? | [ ]Regular frame rate propertiesNameFrame RateTime UnitCameraDescriptionRequired average frame rate for video from the camera. Select number offrames, then select the time unit interval (second, minute or hour).Select required unit for live and recording frame rates (per second, minute,or hour). Note that you can only select time bases that let you speed upframe rates. Example: If you have specified 15 frames per second innormal mode, you cannot specify 16 frames per minute or hour inspeedup mode.Click the Open button to configure detailed and/or camera-specific settings(such as event notification, PTZ preset positions, and fisheye view areas)for the selected camera.Speedup frame rate propertiesNameEnable SpeedupDescriptionThe speedup feature lets you use a higher than normal frame rate if motionis detected and/or an event occurs. When you enable speedup, furthercolumns for specifying speedup details become available.www.milestonesys.com 86 Advanced configuration