12.07.2015 Views

twin-path® slings in action - Hanes Supply, Inc

twin-path® slings in action - Hanes Supply, Inc

twin-path® slings in action - Hanes Supply, Inc

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

HooksYOUR SLING AND RIGGING SPECIALISTHOOKS • SNAP • REPLACEMENT • SORTING• FORGED ALLOY STEELthrough 3/4".• Wide throat to take heavythimbles*Ultimate Load is 5 times SafeWork<strong>in</strong>g Load.†When order<strong>in</strong>g, EYE diameter("C") should be specified.slIDInG cHokeR Hooks Quenched & TemperedsInGle eIGHt safePaRt PaRt WoRkInG DIMensIons (In.) WeIGHtRoPe RoPe loaD* eacHsIze sIze (lbs.) a c e l (lbs.)3/8 – 2,500 2-1/16 5/8 5/8 4-9/32 .771/2 1/8 3,300 2-1/4 3/4 25/32 4-31/32 1.195/8† 3/16 5,000 3-1/16 3/4 OR 1 5/16 6-3/8 2.893/4† 1/4 8,000 3-3/8 1 OR 1-7/16 1-5/32 7-21/32 5.00a-350slIDInG cHokeRHook with latcHG-3315• Pressed steel latches and sta<strong>in</strong>lesssteel spr<strong>in</strong>gs, bolts and nuts.• Safe Work<strong>in</strong>g Loads shown arebased on Ultimate Load that is4 times the Safe Work<strong>in</strong>g Load.snaP Hooks Forged Steel, Quenched & Temperedsafe InsIDeHook WoRkInG DIaM. tHRoat lenGtH WeIGHtsIze loaD of eYe oPenInG oVeRall PoUnDs(In.) (lbs.) (In.) (In.) (In.) PeR 1007/16 750 3/4 3/4 3-15/16 23.259/16 1,000 1-1/8 13/16 4-3/4 48.25s-3316• Easily attached to any hoist withwelded l<strong>in</strong>k load cha<strong>in</strong> and rollercha<strong>in</strong> or wire rope with suitableend fitt<strong>in</strong>g.• Spr<strong>in</strong>g latch, latch bolt with selflock<strong>in</strong>g nut – sta<strong>in</strong>less steel.Nuts cadmium plated brass.• For cha<strong>in</strong> and electric hoistswith swivel jaw-forged.RePlaceMent Hooks Quenched & TemperedWIDtHsIze betWeen DIaM. oVeRall tHRoat WeIGHtHoIst JaWs bolt lenGtH oPenInG eacH(ton) (In.) (In.) (In.) (In.) (lbs.)1/2 9/16 3/8 6-1/8 31/32 1.251 11/16 7/16 7-11/16 1-1/8 2.61a-378• Deep straight throat permits efficient handl<strong>in</strong>g of flat platesor large cyl<strong>in</strong>drical shapes.• The long tapered po<strong>in</strong>t allow easy grab <strong>in</strong> r<strong>in</strong>gs, pear l<strong>in</strong>ks,eye bolts or lift<strong>in</strong>g holes.• Ultimate load is 5 times the Safe Work<strong>in</strong>g Load.Forged Alloy SteelsoRtInG Hooks Quenched & TemperedSafe Work<strong>in</strong>g Load at Tip2 TonSafe Work<strong>in</strong>g Load at Bottom of Hook 7-1/2 TonOverall Length 9-11/16"I.D. of Eye 1-3/8"Open<strong>in</strong>g at Top of Hook 2-13/16"Radius at Bottom of Hook 5/8"Weight Each6.42 Lbs.soRtInG Hookwith HanDleHEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com105

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!