twin-path® slings in action - Hanes Supply, Inc

YOUR SLING AND RIGGING SPECIALISTGrommet slingsSTRAND LAID GROMMET WIRE ROPE SLINGSStrand Laid Grommets have either a wire rope body, or a body of sixstrands laid helically around a fiber or strand core, with either a handtucked or a mechanical splice to form an endless sling body. Minimumcircumference of the sling is 96 times the grommet body diameter.Hand-TuckedContinuous Construction...made from onecontinuous strandMechanical Splice7 Parts of Wire Ropein the Sling BodyNo. 11B Rated Capacity - Tons (2,000 lbs.)6 X 19 CLASS - FC EIPSBASKET HITCHESSLINGBODYDIA(IN) VERT CHOKER VERTICAL 60° 45° 30°1/4 0.94 0.66 1.9 1.6 1.3 0.945/16 1.5 1.0 2.9 2.5 2.1 1.53/8 2.1 1.5 4.2 3.6 3.0 2.17/16 2.8 2.0 5.7 4.9 4.0 2.81/2 3.7 2.6 7.3 6.4 5.2 3.79/16 4.6 3.2 9.3 8.0 6.6 4.65/8 5.7 4.0 11 9.9 8.1 5.73/4 8.2 5.7 16 14 12 8.27/8 11 7.7 22 19 16 111 14 10 29 25 20 141-1/8 18 12 35 31 25 181-1/4 21 15 43 37 30 211-3/8 25 18 51 44 36 251-1/2 30 21 60 52 42 301-5/8 34 24 69 60 49 341-3/4 40 28 79 69 56 401-7/8 45 31 89 77 63 452 50 35 101 87 71 502-1/8 56 39 112 97 79 562-1/4 62 43 124 107 88 622-3/8 68 48 137 118 97 682-1/2 75 52 149 129 106 752-3/4 89 62 177 154 125 893 95 67 191 180 147 104No. 14B Rated Capacity - Tons (2,000 lbs.)6 X 19 & 6 X 37 CLASS - IWRC EIPSBASKET HITCHESSLINGBODYDIA(IN) VERT CHOKER VERTICAL 60° 45° 30°1/4 1.1 0.74 2.1 1.8 1.5 1.15/16 1.6 1.2 3.3 2.8 2.3 1.63/8 2.4 1.6 4.7 4.1 3.3 2.47/16 3.2 2.2 6.4 5.5 4.5 3.21/2 4.1 2.9 8.3 7.2 5.9 4.19/16 5.2 3.7 10 9.1 7.4 5.25/8 6.4 4.5 13 11 9.1 6.43/4 9.2 6.4 18 16 13 9.27/8 12 8.7 25 22 18 121 16 11 32 28 23 161-1/8 20 14 41 35 29 201-1/4 25 17 50 43 35 251-3/8 30 21 60 52 42 301-1/2 36 25 71 62 50 361-5/8 41 29 82 71 58 411-3/4 48 33 95 83 68 481-7/8 54 38 109 94 77 542 62 43 124 107 87 622-1/8 69 48 138 119 98 692-1/4 77 54 154 133 109 772-3/8 85 60 171 148 121 852-1/2 94 66 188 163 133 942-3/4 113 79 225 195 159 1133 133 93 265 230 188 133Rated Capacities Basket Hitch and vertical lift based on D/d ratio of 5 when "d" is diameter of the finished grommet.Rated Capacities based on pin diamter no smaller than 5x the body diameter.Sling angles of less than 30 degrees shall not be usedHEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com36