twin-path® slings in action - Hanes Supply, Inc

YOUR SLING AND RIGGING SPECIALISTcornerMax sleeve (Cut Protection)The CornerMax TM Sleeve is the latest in rigging protection from SLINGMAX ® Rigging Solutions. The Corner-Max TM Sleeve is the ideal solution to protect synthetic slings from cutting when it is not practical to use aCornerMax TM Pad, whether due to curvature of the load edge or repetitive uses such as unloading steel coils.Independent field and laboratory testing has shown the CornerMax TM Sleeve to be extremely cut resistant.The CornerMax TM Sleeve is made with Dyneema ® Fiber and is proven tough. To prevent sliding, the 6" wideCornerMax TM Sleeve has been sewn down the middle (5") on each end of the Twin-Path ® Extra Sling (pictured).The true benefits of this revolutionary material far outweigh the costs and now provide for the use of syntheticslings in applications previously dominated by heavy chain, mesh and wire rope slings.Twin-Path ® Coil Sling• 10 times lighter than conventional steel coil gripper slings.• Chain and metal mesh slings require rigger to use a “fish hook” to grab & pull the sling through the coil.The Twin-Path ® Coil Sling is so light that one underhanded toss is all you need. Also faster to make.• Will not damage the load.• Repairable as manufacturer can remove a damaged CornerMax TM sleeve & sew a new one to the sling.NEW PRODUCTCORNERMAX ®STOCK NO.EXTERNAL SLEEVEWIDTHFASTENED OVERBOTH LEGS OFTWIN-PATH ® SLINGCRNMXS04 6 INCH UP TO TPXC 5000CORNERMAX TM PAD CUT PROTECTIONFollow OSHA, ASME B30.9 & Manufacturer’s Guidelines. Use only if trained. Damaged or misused protection can result in damageor sling failure. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Ensure protection! WARNINGis the correct size & type to protect the sling. Prevent pads & sling from slipping or sliding across load edge. DEATH or INJURY canoccur from improper use, maintenance &/or inspection. MAXIMUM LOADING: Do NOT exceed 25,000 lbs. per inch of sling width.HEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com16