twin-path® slings in action - Hanes Supply, Inc

YOUR SLING AND RIGGING SPECIALISTtwin-Path ® adjustable bridleThe Twin-Path ® Adjustable Bridle sling is a multi-purpose rigging tool and it's important that it is usedproperly. The adjustment ring has a double sling on one side and a single sling on the other side.If the lifting points are an equal distance from thecenter of gravity, then the Twin-Path ® Adjustablecan be hooked-up with the double or single slingon either lifting point.If the lifting points are an equal distance oneither side of the center of gravity but one ishigher, then the double sling should be attached tothe higher lifting point.If one of the lifting points is closer to the center ofgravity, then attach the double sling to this liftingpoint. It will have the highest weight concentration.If the Twin-Path ® Adjustable is attached so that thesingle sling is nearest the center of gravity, it willnot allow the lift to be made.Never use the Twin-Path ® Adjustable Bridle in situationswhere the sling-to-hook angle is greaterthan 45°. Always connect above the center ofgravity. If connections are made below the centerof gravity, then the load may turn when lifted.Follow OSHA, ASME B30.9 & Manufacturer’s Guidelines. Sling can fail if damaged, misused or overloaded. Inspectbefore use. Damaged sling shall not be used. Use only if trained. Do not exceed rated capacity. Protect sling from! WARNING being cut by load edges, corners, protrusions & abrasive surfaces. Avoid exposure to acid, alkalis, ultraviolet light,sunlight & temperature above 180° F. DEATH or INJURY can occur from improper use or maintenance.HEADQUARTERS: 55 James E. Casey Drive • Buffalo, NY 14206 PHONE: 716.826.2636 FAX: 716.826.4412 www.hanessupply.com12