Heavy Duty Balanced Opposed Compressors
Heavy Duty Balanced Opposed Compressors
Heavy Duty Balanced Opposed Compressors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FOR MODELS: JG AND JGA SECTION 5 - MAINTENANCE<br />
Types of Piston Rod Packing Rings<br />
Type "P" Pressure Breaker<br />
This is a single ring. It is cut radially into three equal segments. Total end clearance for the<br />
ring is 0.022 to 0.028 inches (0.56 to 0.71 mm) for PEEK rings and 0.011 to 0.017 inches<br />
(0.28 to 0.43 mm) for bronze and cast iron rings. This ring breaks down or slows the gas flow<br />
without sealing it completely. This end gap should be maintained by adjusting the ring gap or<br />
replacing the ring. See Figure 5-13:.<br />
Radial Cut<br />
Letters toward pressure/cylinder<br />
FIGURE 5-13: TYPE “P” PRESSURE BREAKER<br />
11/01 PAGE 5 - 27