Heavy Duty Balanced Opposed Compressors

More documents

Recommendations

Info

FOR MODELS: JG AND JGA SECTION 1 - DESIGN SPECIFICATIONS & DATA Unloader Identification Plate: Customer Work Order Number, Hydrotest Pressure and Tester’s Personal Stamp are stamped near this plate on top of the Unloader body. Frame Serial Number: stamped on machined surface above the Mechanical Inspector’s Plate. On drive end throw #2 side. Discharge Valve Pocket Identification plate FIGURE 1-6: IDENTIFICATION PLATES - TYPICAL Cylinder Identification Plate - See Figure 1-7: on page 1-7 Suction Valve Pocket Identification Plate Serial Number, MAWP, Part Number, Work Order Number, Hydrostatic Test Pressure, Test Date and Tester’s Personal Stamp are stamped on the end of each cylinder Cylinder Identification Plates appear on each cylinder. The serial number is also stamped on the end of each cylinder. If any plate is missing, please contact Ariel Corporation, Mount Vernon, Ohio for a replacement or specific directions. NOTE: USE THE CYLINDER AND FRAME SERIAL NUMBERS IN ALL CORRESPON- DENCE. PAGE 1 - 6 11/01
FOR MODELS: JG AND JGA SECTION 1 - DESIGN SPECIFICATIONS & DATA Nominal Cylinder Bore Diameter Stroke Length Maximum Allowable Working Pressure (Maximum Relief Valve Setting) Piston End Clearance Minimum Volumetric Clearance Percentage: VVCP (Variable Volume Clearance Pocket - Head End) Unloader Serial Number Base Volume - Additional Fixed Clearance with Pocket in the Closed Position VVCP Maximum Allowable Working Pressure CYLINDER IDENTIFICATION PLATE: Ariel Cylinder Serial Number UNLOADER IDENTIFICATION PLATE: Total Travel Distance Head End or Total Number of Turns FIGURE 1-7: CYLINDER AND UNLOADER IDENTIFICATION PLATES Cylinder Class Maximum Cylinder Rated Speed - Crankshaft Revolutions per Minute Crank End Nominal Compressor Cylinder Bore Diameter Maximum Variable Volume (at the Fully Open Position) 11/01 PAGE 1 - 7
Page 1 and 2: ARIEL Heavy Duty Balanced Opposed C
Page 3 and 4: FOR MODELS: JG AND JGA TABLE OF CON
Page 5 and 6: FOR MODELS: JG AND JGA TABLE OF CON
Page 7 and 8: FOR MODELS: JG AND JGA SECTION 1 -
Page 11: FOR MODELS: JG AND JGA SECTION 1 -
Page 63 and 64:
FOR MODELS: JG AND JGA SECTION 4 -
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
show all

Heavy Duty Balanced Opposed Compressors

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?