Heavy Duty Balanced Opposed Compressors

More documents

Recommendations

Info

FOR MODELS: JG AND JGA SECTION 7 - APPENDICES Minimum Hand Tools Required The following hand tools are normally all that is required to work on Ariel JG and JGA compressors. These are in addition to the Ariel furnished and optional tools listed above. Please contact Ariel if you have any questions about tools for Ariel units. 3/8" Square Drive Ratchet Wrench • 1/2" Square Drive Ratchet Wrench • 2" and 6" Extensions for above Ratchet • 3/8" Square Drive Breaker Bar • 1/2" Drive Speed Wrench • 1/2” Female x 3/4” Male Adaptor • • 3/8" Square Drive Universal Joint • 3/8" Square Drive Torque Wrenches (10 LB-IN to 250 LB-IN) • 1/2" Square Drive Torque Wrenches (15 LB-FT to 250 LB-FT) • Set of 12 Point Sockets for a 3/8" Square Drive • Set of 12 Point Sockets for a 1/2" Square Drive • 3/8" Hex Key and 1/4" Hex Key (Allen) Sockets for a Square Drive Ratchet Wrench • 5/16" - 12 Point Box Wrench • 1/2" x 9/16" Open End Wrench • 3/8" x 7/16" Open End Wrench • 12” Adjustable Wrench • 2 - Medium Size Screw Drivers • Babbitt or Plastic-Faced Slugging Hammer • Feeler Gage Pack • Awl PAGE 7 - 2 11/01
FOR MODELS: JG AND JGA SECTION 7 - APPENDICES Open End Wrench for Hex Crosshead Nuts B-0016 Valve Tool A-0135 A-0409 Peg Wrench A-0076 Piston Nut Spanner A-0279 FIGURE 7-1: ARIEL TOOLS FIGURE 7-2: CRANK END SETTING TOOL 0.035 IN. (0.89 mm) (A-8561) FIGURE 7-3: OPTIONAL PISTON ROD ENTERING SLEEVE (A-8561) 11/01 PAGE 7 - 3
Page 1 and 2:
ARIEL Heavy Duty Balanced Opposed C
Page 3 and 4:
FOR MODELS: JG AND JGA TABLE OF CON
Page 5 and 6:
FOR MODELS: JG AND JGA TABLE OF CON
Page 7 and 8:
FOR MODELS: JG AND JGA SECTION 1 -
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74: FOR MODELS: JG AND JGA SECTION 4 -
Page 123: FOR MODELS: JG AND JGA SECTION 7 -
show all

Heavy Duty Balanced Opposed Compressors

Create successful ePaper yourself

Delete template?

Save as template?