Heavy Duty Balanced Opposed Compressors

FOR MODELS: JG AND JGA
SECTION 7 - APPENDICES
Ariel Tools
Ariel Furnished Tools
Ariel provides one tool box with each unit with tools included in the box as listed below (see
Figure 7-1:).
• Peg Wrench for Round Crosshead Nuts 3/4" Diameter (A-0076)
• Open End Wrench for Hex Crosshead Nuts 2" (B-0016)
• Ratchet Extension Support (B-1240)
• 1/4" x 3/8" UNF Valve Tool for Installing or Removing Valves (A-0409)
• 5/16" x 1/2" UNF Valve Tool for Installing or Removing Valves (A-0135)
• Piston Nut Spanner for 3/4" Square Drive Ratchet (A-0279)
Piston Turning Tool for 9/16” socket (A-1678) provided with small tandem cylinders
•
only
Crank End Clearance Setting Tool 0.035” (0.89 mm) special tool provided for 2-3/4M,
•
3M, 2-3/4P-CE and 3-14P-CE class cylinders only (A-8159)
Torque Chart (D-2159)
•
Ariel provides these tools with every compressor. Please contact your Distributor if you do
not have these tools.
These tools are specifically designed for use on Ariel units. Clean all tools before use.
Ensure that the tool and the part being removed or installed are fully engaged during the
process. If a tool is missing, worn or broken, please call your distributor for a replacement.
Do not use substitute, worn or broken tools.
Also included in the tool box are standard commercial tools as follows:
• Allen Wrenches: 3/32”, 1/8", 9/64”, 5/32", 3/16", 1/4”, 5/16” & 3/8"
Ariel Optional Tools
• Piston and Rod Clamping Fixture (D-0961) (see Figure 5-11: on page 5-19)
• Force Feed Lubricator Bearing Housing Spanner Wrench (A-8158)
• Force Feed Lubrication Hand Purge Pump (G-7162)
• Piston Rod Entering Sleeve (A-8561)
11/01 PAGE 7 - 1