Heavy Duty Balanced Opposed Compressors
Heavy Duty Balanced Opposed Compressors
Heavy Duty Balanced Opposed Compressors
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FOR MODELS: JG AND JGA SECTION 7 - APPENDICES<br />
Minimum Hand Tools Required<br />
The following hand tools are normally all that is required to work on Ariel JG and JGA compressors.<br />
These are in addition to the Ariel furnished and optional tools listed above. Please<br />
contact Ariel if you have any questions about tools for Ariel units.<br />
3/8" Square Drive Ratchet Wrench<br />
•<br />
1/2" Square Drive Ratchet Wrench<br />
•<br />
2" and 6" Extensions for above Ratchet<br />
•<br />
3/8" Square Drive Breaker Bar<br />
•<br />
1/2" Drive Speed Wrench<br />
•<br />
1/2” Female x 3/4” Male Adaptor<br />
•<br />
• 3/8" Square Drive Universal Joint<br />
• 3/8" Square Drive Torque Wrenches (10 LB-IN to 250 LB-IN)<br />
• 1/2" Square Drive Torque Wrenches (15 LB-FT to 250 LB-FT)<br />
• Set of 12 Point Sockets for a 3/8" Square Drive<br />
• Set of 12 Point Sockets for a 1/2" Square Drive<br />
• 3/8" Hex Key and 1/4" Hex Key (Allen) Sockets for a Square Drive Ratchet Wrench<br />
• 5/16" - 12 Point Box Wrench<br />
• 1/2" x 9/16" Open End Wrench<br />
• 3/8" x 7/16" Open End Wrench<br />
• 12” Adjustable Wrench<br />
• 2 - Medium Size Screw Drivers<br />
• Babbitt or Plastic-Faced Slugging Hammer<br />
• Feeler Gage Pack<br />
• Awl<br />
PAGE 7 - 2 11/01