IBM Tivoli Storage Manager for UNIX and Linux Backup-Archive ...

BACKUPSETName=Specifies the name of a backup set you want to query. You can use wildcardsto specify the backup set name. If you use wildcards or do not specify abackup set name, all backup sets that you own are displayed. This parameteris required.When a backup set is created, the server assigns root as the owner of thebackup set. When querying a backup set on the server, a non-root user will notsee the backup set listed, even if they know the backup set name and use it inthe query.The value of backupsetname depends on the location of the backup set, andcorresponds to one of the three choices below.backupsetnameSpecifies the name of the backup set from the Tivoli Storage Managerserver. If the location parameter is specified, you must set-location=server.localfilenameSpecifies the file name of the first backup set volume. You must set-location=file.tapedeviceSpecifies the name of the tape device containing the backup setvolume. You must use a Windows native device driver, not the devicedriver provided by Tivoli. You must set -location=tape.LOCation=Specifies where Tivoli Storage Manager searches for the backup set. If you donot specify the location parameter, the client searches for backup sets on theTivoli Storage Manager server.serverfiletapeExamplesTaskTaskTaskTaskSpecifies that Tivoli Storage Manager searches for the backup set fromthe server. This is the default.Specifies that Tivoli Storage Manager searches for the backup set froma local file.Specifies that Tivoli Storage Manager searches for the backup set froma local tape device.Query all backup sets from the Tivoli Storage Manager server.Command: query backupset -backupsetname=*Query a backup set called monthy_financial_data from the Tivoli StorageManager server.Command: query backupset-backupsetname=monthly_financial_data.12345678Query the backup set in the file /home/budget/weekly_budget_data.ost.Command: dsmc query backupset -backupsetname="/home/budget/weekly_budget_data.ost" -loc=fileQuery the backup set from the /dev/rmt0 tape device.Command: dsmc query backupset -backupsetname=/dev/rmt0 -loc=tapeRelated informationChapter 11. Using commands 483