Belgacom Twist 600 - Help and support - Belgacom

First stepsSetting up the baseThe base is designed for use in enclosed dry rooms with a temperature rangeof +5°C to +45°C.¤ Install the base on a level, non-slip surface in a central location in your houseor flat or mount the base on the wall ¢ page 76.Please notePay attention to the range of the base.This is up to 300 m in unobstructed outdoor areas and up to 50 m insidebuildings. The range is reduced when Eco Mode (¢ page 55) is activated.The phone's feet do not usually leave any marks on surfaces. However, due tothe multitude of different varnishes and polishes used on today's furnishings,the occurrence of marks on the surfaces cannot be completely ruled out.Please note:u Never expose the telephone to the influence of heat sources, direct sunlightor other electrical devices.u Protect your telephone from moisture, dust, corrosive liquids and vapours.Connecting the base¤ First connect themains adapter 1.¤ Then connect thetelephone jack 2and insert thecables into thecable ducts.121Please note:u The mains adapter must always be connected, as the phone will not operatewithout a mains connection.u Only use the mains adapter and phone cord supplied. Pin connections ontelephone cables can vary (pin connections ¢ page 75).10