Belgacom Twist 600 - Help and support - Belgacom

SMS (text messages)SMS (text messages)Your device is delivered ready to send SMSmessages.Preconditions:u Calling Line Identification is enabled foryour phone line.u Your network provider supports SMS onthe fixed line network (information onthis can be obtained from your networkprovider).u You are registered with your serviceprovider to send and receive SMS.u To receive SMS messages you must beregistered with your service provider.This is completed automatically whenyou send your first SMS.Please noteIf your phone is connected to a PABX,please read ¢ page 46.Writing/sending an SMS§Options§SendSMSPress the display key.Select and press §OK§.Select and press §OK§.~ / s Select number with area code(even if you are in that area)from the directory or enterdirectly. For sending SMS to anSMS mailbox: add the mailboxID to the end of the number.§Send§Press the display key. The SMSis sent.Please noteu If you are interrupted by an externalcall while writing an SMS, the text isautomatically saved in the draftSMS list.u If the memory is full, or if the SMSfunction on the base is being usedby another handset, the operation iscancelled. An appropriate messageappears in the display. Delete SMSmessages you no longer require orsend the SMS later.Writing an SMSv ¢ ËMailbox 2 Select mailbox if necessaryand press §OK§.~ Enter mailbox PIN if necessaryand press §OK§.New SMS Select and press §OK§.~ Write an SMS.Please noteu For instructions on how to entertext and special characters,please see page 75.u An SMS can be up to 160 characters.Sending an SMSc Press the talk keyOr:40