Belgacom Twist 600 - Help and support - Belgacom

Connecting the base to the PABXSetting pausesChanging the pause after line seizureYou can change the length of the pausethat is inserted between pressing the talkkey c and sending the number.v Open the main menu.*#Q5#LPress keys.~ Enter digit for the pauselength (1 = 1 sec.; 2 = 3 sec.;3 = 7 sec.) and press §OK§.Temporarily switching to tonedialling (DTMF)If your PABX still operates with dial pulsing(DP), but you need tone dialling for a connection(e.g. to listen to the network mailbox)you must switch to tone dialling forthe call.Precondition: You are conducting a call orhave already dialled an external number.* Press the star key.After the call is ended, dial pulsing is automaticallyactivated again.Change pause after recall keyYou can change the length of the pause ifyour PABX requires this (refer to the userguide for your PABX).v Open the main menu.*#Q5#2Press keys.~ Enter a digit for the length ofthe pause (1 = 800 ms;2 = 1600 ms; 3 = 3200 ms)and press §OK§.Changing a dialling pause (pause afteraccess code)Precondition: You have saved an accesscode (¢ page 68).v Open the main menu.*#Q5#Press keys.~ Enter number for the length ofthe pause (1 =1sec.;2 =2sec.; 3 = 3 sec.;4 = 6 sec.) and press §OK§.To insert a dialling pause: press and holdS for 2 seconds. A P appears in the display.69