12.07.2015 Views

Belgacom Twist 600 - Help and support - Belgacom

Belgacom Twist 600 - Help and support - Belgacom

Belgacom Twist 600 - Help and support - Belgacom

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

First stepsAttaching the belt clipThe h<strong>and</strong>set has notches on each side to attach the belt clip.¤ To attach – press the belt cliponto the back of the h<strong>and</strong>set sothat the protrusions on the beltclip engage with the notches.¤ To remove – using your rightthumb apply pressure to thecentre of the belt clip, push thefingernail of your left index fingerbetween the clip <strong>and</strong> thecasing <strong>and</strong> lift the clip upwards.Placing the h<strong>and</strong>set in the base¤ Place the h<strong>and</strong>set in the base with its display facing forward.Each h<strong>and</strong>set is registered with the base at the factory. You do not need to completea registration. If you wish to use your h<strong>and</strong>set with a different base or usefurther h<strong>and</strong>sets with your base, you will have to register the h<strong>and</strong>set manually¢ page 56.To charge the batteries, leave the h<strong>and</strong>set in the base.Please noteOnly place the h<strong>and</strong>set in the base that is intended for it.12

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!