Belgacom Twist 600 - Help and support - Belgacom
Belgacom Twist 600 - Help and support - Belgacom
Belgacom Twist 600 - Help and support - Belgacom
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Setting the alarm clockSetting the alarm clockPrecondition: The date <strong>and</strong> time havealready been set (¢ page 14).Activating/deactivating the alarmclock <strong>and</strong> setting the wake-up timev ¢ É ¢ Alarm Clock¤ Change multiple line input:Activation:Select On or Off.Time:Enter the wake-up time in 4-digit format.Volume:Set the volume (1–6).Melody:Select melody.§Save§ Press the display key.In idle status, the ¼ icon <strong>and</strong> wake-uptime are displayed.A wake-up call is signalled on the display<strong>and</strong> with the selected ringtone(¢ page 2). The wake-up call sounds for60 seconds. If no key is pressed, the wakeupcall is repeated twice at five minuteintervals <strong>and</strong> then switched off.During a call, the wake-up call is only signalledby a short tone.Deactivating the wake-up call/repeating after a pause (snooze mode)Precondition: A wake-up call is sounding.§OFF§or§Snooze§Press the display key. Thewake-up call is deactivated.Press the display key or anykey. The wake-up call is deactivated<strong>and</strong> then repeated after5 minutes. After the secondrepetition the wake-up call isdeactivated completely.Using several h<strong>and</strong>setsRegistering h<strong>and</strong>setsYou can register up to six h<strong>and</strong>sets to yourbase.A h<strong>and</strong>set can be registered on up to fourbases.Manual registration on <strong>Twist</strong> <strong>600</strong>/610You must activate manual registration ofthe h<strong>and</strong>set on both the h<strong>and</strong>set <strong>and</strong> thebase.When the registration process has completedsuccessfully, the h<strong>and</strong>set returns toidle status. The h<strong>and</strong>set's internal numberis shown in the display e.g. INT 1. If not,repeat the procedure.On the h<strong>and</strong>setThe h<strong>and</strong>set must not be registered to abase.§Register§ Press the display key.The h<strong>and</strong>set is already registered to abase:v ¢ Ï ¢ Registration¢ Register H<strong>and</strong>setIf the h<strong>and</strong>set is already registered on fourbases:s Select base, e.g. Base 3 <strong>and</strong>press §OK§.~ If required, enter the systemPIN for the base <strong>and</strong> press §OK§.A message displays that a search for a basethat is ready for registration is being carriedout.On the baseWithin 60 seconds press <strong>and</strong> hold the registration/pagingkey on the base(¢ page 3) (approx. 3 seconds).56
Change language