Belgacom Twist 600 - Help and support - Belgacom

Operating the answering machine of the Twist 610 base• Setting the recordingparametersThe answering machine has already beenpreset at the factory. Individual settingscan be adjusted using the handset.v ¢ Ì ¢ Recordings¤ Change multiple line input:Length:Maximum recording time 1 min.,Select 2 min., 3 min. or Maximum.Quality:Select recording quality Long Play orHigh. If the quality is higher, the maximumrecording time is reduced.Ring Delay:Select when the answering machineshould accept a call: Immediately, after10 sec., 18 sec., 30 sec. or Automatic.§Save§Press the display key.Information about call acceptanceIn Automatic mode, the following appliesfor ring delay:u If there are no new messages, theanswering machine accepts a call after18 seconds.u If new messages are present, theanswering machine accepts a call after10 seconds.When operating remotely (¢ page 53)you can tell after approx. 15 seconds thatthere are no new messages (otherwise theanswering machine would already haveaccepted your call). There will be no callcharges if you hang up now.Please note:You can configure your telephone so thatthe first ring is suppressed on all calls(¢ page 46). This means that the timeselected for call acceptance predetermineshow long the caller must waitbefore the answering machine answersthe call.Changing the language for voiceprompt and pre-recordedannouncementv Open the main menu.*#Q5#2Enter digits and pressQ §OK§ To set Dutch. §OK§ To set French.2 §OK§ To set German.• Resetting fast access for theanswering machine using key 1By default, key has been assigned forfast access to the integrated answeringmachine. However, if you have set the networkmailbox for fast access (¢ page 54),you can reset this setting.v ¢ Ì ¢ Set Key 1Answering MachineSelect and press §OK§.Once you have selected the answeringmachine, press and hold key . Youwill be connected directly.The setting for fast access applies to allregistered handsets.52