Belgacom Twist 600 - Help and support - Belgacom

ECO DECTECO DECTYou are helping to protect the environmentwith your Twist 600/610.Reduced energy consumptionYour telephone has a power-savingadapter plug and uses less power.Reducing radiationThe radiation from your telephone isreduced automatically:u The handset's transmission power isreduced depending on the distance tothe base.u The transmission power on the base isreduced to virtually zero when only onehandset is registered and the handset isin the base.You can reduce the radiation from thehandset and base even more by usingEco Mode or Eco Mode+:u Eco Mode80% transmission power reduction ofthe base in standby and talk mode.u Eco Mode+100% transmission power deactivationof the base and handset when a call isnot being made or received.Eco Mode / Eco Mode+ can be activatedand deactivated independently of eachother and also work on multiple handsets.The handset does not have to be in thebase.Activating/deactivating the Eco Mode /Eco Mode+v ¢ Ï ¢ Eco Mode¢ Eco Mode / Eco Mode+§Change§ Press the display key(³ =on).Status displaysDisplay iconÐiÑÒ|(flashes)Ð whiteÐ green¼ white¼ greenSignal strength:– good to poor– no signalEco Mode deactivatedEco Mode enabledEco Mode+ enabled(displayed instead of thereception strength iconwhen in idle status)Eco Mode and EcoMode+ activatedPlease noteu With Eco Mode+ enabled, press andhold the talk key c to check thatthe base can be reached. You willhear the ringtone if the base can bereached.u When Eco Mode+ is enabled:– call setup will be delayed byapprox. 2 seconds.– handset standby time will bereduced by approx. 50%.u Registering handsets that do notsupport Eco Mode+ will cause themode to be deactivated on the baseand all other handsets.u Activating Eco Mode reduces therange of the base.u Eco Mode / Eco Mode+ andrepeater support (¢ page 66) canceleach other out, i.e. if you use arepeater you cannot use Eco Modeand Eco Mode+.55