Belgacom Twist 600 - Help and support - Belgacom

Connecting the base to the PABXConnecting the base tothe PABXThe following settings are only necessaryif your PABX requires them; see the PABXuser guide.You cannot send or receive SMS messageson PABXs that do not support Calling LineIdentification.• Dialling modes and recallThe current setting is indicated by Ø.Changing the dialling modeThe following dialling modes can beselected:u Tone dialling (DTMF)u Dial pulsing (DP)v ¢ Ï ¢ Telephony ¢ Dialling ModesSetting recallSelect dialling mode and press§Select§ (Ø =selected).Your phone is preset at the factory foroperation on the main connection.For operation on a PABX, you may haveto change this value. Please refer to theuser guide for your PABX.v ¢ Ï ¢ Telephony ¢ RecallsSelect recall and press §Select§(Ø = set value).Possible values are:80 ms, 100 ms, 120 ms,180 ms, 250 ms, 300 ms,400 ms, 600 ms, 800 ms.• Saving an access code(outside line code)Precondition: You may have to enter anaccess code for external calls in your PABX,e.g. "0".v ¢ Ï ¢ Telephony ¢ Access Code~ Enter or change access code,max. 3 digits.§Save§ Press the display key.If an access code has been saved:u The access code is prefixed automaticallywhen you select from the followinglists: numbers of the SMS centres,calls list or answering machine list.u The access code must be entered whendialling manually and when manuallyentering directory, emergency/shortcutnumbers and SMS centre numbers.u If you copy the recipient's number fromthe directory when sending an SMS,you have to delete the access code.u An existing access code is deletedusing Ñ.68