Belgacom Twist 600 - Help and support - Belgacom

Base settingsBase settingsThe base settings are carried out using aregistered handset.Changing the base ringtones(Twist 610)u Volume:You can choose between five volumes(1–5; e.g. volume 3 = Š) and the"crescendo" ringtone (6; volumeincreases with each ring = ‡).u Ringtones:You can select a ringtone from a list ofpre-loaded ringtones.In idle status:v ¢ Ï ¢ Audio Settings¢ Ringtones (Base)¤ Change multiple line input:r Set volume.sr§Save§Scroll to the next line.Set melody.Press the display key to savethe setting.• Activating/deactivatingmusic on holdv ¢ Ï ¢ Audio Settings¢ Music on holdPress §Change§ to activate or deactivate themusic on hold (³ = on).• Repeater support (option notavailable)With a repeater you can increase the rangeand signal strength of your base. You willneed to activate repeater mode. This willterminate any calls that are in progress atthe time.Precondition: A repeater is registered.v ¢ Ï ¢ System ¢ Repeater ModePress §Change§ to deactivate repeater mode(³= on).Please noteEco Mode / Eco Mode+ (¢ page 55)and repeater support cancel eachother out, i.e. if you use a repeater youcannot use Eco Mode and Eco Mode+.• Protecting againstunauthorised accessProtect the system settings of the basewith a PIN known only to yourself. The systemPIN must be entered when, for example,registering/deregistering a handsetto/from the base or when restoring thedefault settings.Changing the system PINYou can change the 4-digit system PIN seton the base (default setting: 0000) to a 4-digit PIN known only by you.Twist 610: Setting a system PIN facilitatesremote operation of the answeringmachine ¢ page 53.v ¢ Ï ¢ System ¢ System PIN~ Enter the current system PINand press §OK§.~ Enter your new system PINand press §OK§.66