KS810-P User Manual Guide - KeyScan

The user wishes to scan an image and insert it into the current Word documentand place it in the current position of the cursor.Assuming that the AutoScan menu [F9] function is set to “Scan Image ToCurrent Application”. The user inserts the document into the scanner scanningslot.The NoTouch-AutoScan is activated and displays the Timeout Bar BoxDuring the timeout period the user moves the mouse over the Timeout Bar toindicate that he wishes to activate AutoScan.AutoScan is activated and replaces the Timeout Bar with a function selectionpop-up menu.The user selects the [F9] function.The scanner perform scanning, scanning parameters are predefined for thisfunction. One of the options available for setting is to have the scanner scanninguser interface appear before scanning so the user can reset the scanningparameters each time he uses [F9].When scanning is finished KeyScan Imaging will trim the image black edges andenhance the image colors.KeyScan Imaging will perform the selected function- In our example it will pushthe image into the current application (providing the application accept themethod for pushing the data, usually the Windows clipboard).7.2.3.2. Text to MS-WORD:The default setting of AutoScan sets F12 to perform the Scan OCR to MS-Word.This function will scan a document, when finished scanning it will process thedocument automatically using the Integrated IRIS OCR engine and produce acompound document of images and translated text all created in MS-WORD fileformat.The user press [F12] button (OCR to MS-WORD) function.The scanner perform scanning, scanning parameters are predefined for thisfunction.When finished scanning the KeyScan Imaging activates automatically theintegrated OCR (Image analysis and image to text translation) engine andproduces a compound document of combined text and images, in the requestedMS-WORD file format.