Client for 32-bit Windows Administrator's Guide - Citrix Knowledge ...

18 Client for 32-bit Windows Administrator’s Guide Go to Document CenterSystem RequirementsTo run Version 8.x of the Clients, client devices must meet the followingrequirements:• Standard PC architecture, 80386 processor or greater as required for theoperating system.• Windows 9x, Windows Me, Windows NT 4 or later, Windows 2000,Windows XP, or Windows 2003.• Available memory as recommended for the operating system by Microsoft.• Internet Explorer Version 5.0 or later, or Netscape Navigator or CommunicatorVersion 4.78, 6.2, or later.• Microsoft mouse or 100% compatible mouse.• VGA or SVGA video adapter with color monitor.• High-density 3.5-inch disk drive (optional) and available hard drive space.• Windows-compatible sound card for sound support (optional).• For network connections to the server farm, a network interface card (NIC) andthe appropriate network transport software are required.Supported connection methods and network transports are:ProtocolProgramNeighborhood AgentWeb ClientProgramNeighborhoodTCP/IP+HTTP X X XSSL/TLS+HTTPS X X XTCP/IP X XNetBIOSXIPXSPXXXFor information about configuring the Clients to use SSL or TLS to securecommunications, see “Configuring and Enabling Clients for SSL and TLS” onpage 86.• For serial (dial-up) connections to the server farm (available with ProgramNeighborhood only), an internal modem or serial port and external modemusing a 16550 Universal Asynchronous Receiver/Transmitter (UART) isrecommended. This feature is not supported on Windows 2003 servers.