Client for 32-bit Windows Administrator's Guide - Citrix Knowledge ...

72 Client for 32-bit Windows Administrator’s Guide Go to Document CenterYou control the amount of bandwidth client audio mapping uses from the CitrixConnection Configuration tool, which is available from the ICA AdministratorToolbar on the server running MetaFrame Presentation Server. The tool lets youchoose among three different audio quality settings and you can disable client audiomapping altogether. See the MetaFrame Presentation Server Administrator's Guidefor more information about client audio mapping.Note Client sound support mapping is not supported when connecting toMetaFrame Server 1.0 and 1.1 for UNIX.Configuring Multiple MonitorsIf your client operating system with video hardware and drivers provides multiplemonitor support with the Windows taskbar on the primary (left) monitor (Windows98 and 2000 mode of multiple monitor support), there are restrictions in the level ofsupport when using the client configured with seamless windows. Multiplemonitors are fully supported when the client is configured in a non-seamless modeand set with the same color depth on all monitors in use.Noteleft).Secondary windows sometimes appear in the primary monitor (uppermost,System Hardware RequirementsTo enable multiple monitor support, the system must have the following:• Multiple PCI video boards, compatible with the Client on the appropriateWindows platform-or-• A special multiple monitor video board, such as the Matrox G400, compatiblewith the Client on the appropriate Windows platformThe following hardware configurations were tested with multiple monitor support.Important Citrix highly recommends that you test these configurations on yourown hardware to ensure that they function properly for your specific machineconfiguration.• On Windows 98, Matrox G400 is fully supported as a Windows 98/2000-stylemultiple monitor