Client for 32-bit Windows Administrator's Guide - Citrix Knowledge ...

Go to Document Center Chapter 5 Configuring Features Common to the Clients 75To access the ctxgrab utility from the window manager1. In seamless mode, right-click the ctxgrab button in the top, left-hand corner ofthe screen to display a menu and choose the grab option.In full screen mode, left click to display the ctxwm menu and choose the graboption.2. When ctxgrab starts, a dialog box appears.To copy from an application in a Client window to a local application1. From the ctxgrab dialog box, click From screen.2. To:Select a window: move the cursor over the window you want to copy and clickthe middle mouse button.Select a region: hold down the left mouse button and drag the cursor to selectthe area you want to copy.Cancel the selection: click the right mouse button. While dragging, cancel theselection by clicking the right mouse button before releasing the first button.3. Use the appropriate command in the local application to paste the object.Using ctxcaptureThe ctxcapture utility is a more fully-featured utility for cutting and pastinggraphics between published applications and applications running on the localclient device.With ctxcapture you can:• Grab dialog boxes or screen areas and copy them between an application in anICA Client window and an application running on the local client device,including non-ICCCM-compliant applications• Copy graphics between the Client and the X graphics manipulation utility xvfIf you are connected to a published desktop, ctxcapture is available from thecommand prompt. If you are connected to a published application and theMetaFrame administrator has made it available, you can access ctxcapture throughthe ctxwm window manager.To access the ctxcapture utility from the window manager1. Left click to display the ctxwm menu and choose the screengrab option.2. When ctxcapture is started, a dialog box is displayed.