Prisma II High Density EDFA Modules Installation Guide
Prisma II High Density EDFA Modules Installation Guide
Prisma II High Density EDFA Modules Installation Guide
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2Module <strong>Installation</strong><strong>Prisma</strong> <strong>II</strong> XD Chassis StyleThe <strong>Prisma</strong> <strong>II</strong> XD chassis back panel serves as both a connector panel and areceptacle for AC power supply modules and the ICIM2-XD, when installed.The RF connectors are arranged in pairs, and each pair is numbered to identify itscorresponding module slot. The Port A connector in each pair is identified by a blackretaining nut and a black circle in the panel artwork, while the Port B connector isunmarked. The Port A and Port B connectors correspond to the upper and lowerconnectors, respectively, on the chassis midplane.28 78-4037880-01 Rev B
Change language