Prisma II High Density EDFA Modules Installation Guide

ICIM Password• If the password is accepted, the word Accepted appears in the menu, andyou are able to return to the MAIN menu.• If the password was rejected, the word Rejected appears in the menu.Reasons for a password to be rejected include:– Entering more than eight digits for the password.– Pressing keys other than the 0-9 number keys.– Entering an incorrect password if a valid password has been entered.If the password is rejected, press the key to return to the passwordmenu and re-enter the password as described in step 3 above.I C I MI C I MI C I MI C I MS h e l f 0S l o t 1 5S h e l f 0S l o t 1 5S h e l f 0S l o t 1 5S h e l f 0S l o t 1 5U s e r P s wU s e r P s w********U s e r P s w1234****U s e r P s w12345678R e j e c t e dA c c e p t e dS h i f t O f fS h i f t O nS h i f t O f fS h i f t O f fTP013To Change the User PasswordIf a user password has been entered, it may be changed. However, the currentpassword must be active prior to changing it. If the current password has expired(more than 10 minutes have passed since your last keystroke), you must re-enter thecurrent password before changing to a new one.1 Access the Password menu as shown in the procedure To Access the PasswordMenu (on page 49).2 Use the key to scroll down until Change Psw is highlighted.3 Press the key to select Change Psw.4 When Change Psw /Shift Off appears, press the key to display Shift On,and then enter the eight digits of your new password, using the 0-9 number keys.If at any time you input a digit that is incorrect or wish to change a digit, use theCAN (Cancel) function by pressing thekey to delete that digit.5 Press the key to input the new password. As a result:78-4037880-01 Rev B 51