Prisma II High Density EDFA Modules Installation Guide

Chapter 3Operation using ICIMChecking Manufacturing Data using the ICIMTo Check Manufacturing DataYou can display the manufacturing data for this module on the ICIM LCD.Complete the following steps to access the manufacturing data.1 From the MAIN menu, press the key to highlight the Shelf and Slot fields.2 Press the key to address the Shelf number. Then press the key or thekey to scroll to the number of the desired shelf.3 Press the key. The Slot field is highlighted.4 Press the key or the key to scroll to the number of the desired slot.5 Press the key. The MODULE menu for this module will be selected, asshown on the left below. Press themenus, as shown on the right below.key to enter the start of the MFG. DATA6 Use the and keys to scroll through the manufacturing data.64 78-4037880-01 Rev B