download datavideo se-3000-8 product manual - Go Electronic

Input & Output Connections – Main UnitStarting from the bottom left corner.SDI / HD-SDI Inputs 1~8 & 9 ~16The lower row of SDI inputs are labelled 1~8. The upper row ofSDI inputs are labelled 9~16. If your unit has 8 inputs only thenthe upper row of BNC connectors will not be present.Units with only 8 inputs can be upgraded to 16 inputs, pleasespeak with your local Datavideo supplier for availability and price.AUX Outputs 1~44 user delegated HD-SDI Auxiliary outputs – see page 15.PGM & PVW OutputsHD-SDI Program (PGM) and Preview (PVW) outputs.MULTI-1 & MULTI-2 OutputsHD-SDI Multi Image Preview of input sources with PGM, PVW,Still Store 1 and 2 – see page 16.REF IN & REF LOOPUse these connections to loop external house sync through theSE-3000 Mixer. See page 50.SD COMPONENT OUTPUTDownscaled SD Component (YPbPr / RGB) PGM output.HD COMPONENT OUTPUTHD Component (YPbPr / RGB) PGM output.DVI-D InputThis input can accept signals from computer or laptop. A DVI-D toHDMI cable is required if connecting a HDMI source here.Any input needs to match the resolution of the mixer.DVI-D OutputCan be set up to output Multi Image Preview, PGM or PVWAny Monitor connected needs to match the mixer resolutionEthernet PortsUsed to connect the Main Unit to the Control Panel / Keyboard.An additional Ethernet port is provided so that the unit can becontrolled remotely via PC software - see page 12.11