download datavideo se-3000-8 product manual - Go Electronic

More documents

Recommendations

Info

Saving the DSK1 DSK2 set upOnce you are happy with the DSK1 / DSK2 set up remember to save your current user setup (see page30). In this way several Keying set ups can be saved to different user memory slots. This allows you toswitch to a previous Keyer set up quickly.SE-3000 Keying layersThe SE-3000 has 4 dedicated keyers, Key1, Key2, DSK1 and DSK2. Allfour keyers can be active at the same point in the production. However,these keyers have a layering order over any selected background source.The example diagram below gives you an idea of how these keyers arelaid on top of each other.DSK TransitionsEach DSK button has an LED above it. This LED can be Red or Green. The DSK1 orDSK2 button itself can be Off or On (back lit Green when On). To understand therelationship between the DSK button and the LED above try the following example withDSK1 already set up as described on the previous page.1. If the DSK1 button is Off and the LED above it is Red then DSK1 is not active inProgram or Preview.2. If the DSK1 button is On and the LED above it is Red then DSK1 is currently active in Preview Only.3. If the CUT or AUTO TRANS button is pressed then DSK1 will move to the Program output. Once thetransition is complete the LED above DSK1 will change from Red to Green to confirm the DSK iscurrently active on the Program output. NOTE: The T-Bar has no effect on DSK transitions.4. If the CUT or AUTO TRANS button is used again then the DSK1 button will remain On but the LEDabove will change back from Green to Red. DSK1 is now removed from the Program output and isactive only in the Preview output.5. To remove DSK1 from the Preview output press the DSK1 button so it is Off and not back lit Green.The LED above KEY1 should be Red also. This confirms DSK1 is not active in Program or Previewand we are now back at point 1.50
The DSK2 button and the LED above it perform in exactly the same way as described above.51
Page 1 and 2: .8 / 16 CHANNEL SWITCHER.SE-3000Ins
Page 4 and 5: The Rotation value ................
Page 6 and 7: Warnings and Precautions1. Read all
Page 8 and 9: IntroductionThe Datavideo SE-3000 i
Page 10 and 11: Main UnitFront PanelThe front panel
Page 12 and 13: Starting from the Top left cornerXL
Page 14 and 15: Video ConnectionsSDI Video InputsLo
Page 16 and 17: Video OutputsThe SE-3000 has many v
Page 18 and 19: The bottom of the screen now shows
Page 20 and 21: Source Select Button GroupThis grou
Page 22 and 23: WIPE Selection MenuThere are 30+ di
Page 24 and 25: Wipe ShadeNote: In order for the Wi
Page 26 and 27: Is the value used by the FTB or Fad
Page 28 and 29: within the Stills display under the
Page 30 and 31: Storing and Recalling USER Set UpsT
Page 32 and 33: Flex screen orderThe Flex screen is
Page 34 and 35: The Z value changes the size and po
Page 36 and 37: Flex Key and Fill Example CG-350 Se
Page 38 and 39: LightingLighting of your chosen gre
Page 40 and 41: the key using the Chroma Key Ctrlan
Page 42 and 43: Color SpillThe Color Spill options
Page 44 and 45: effects of Lift, Gain, Opacity andI
Page 46 and 47: Keyer MatteWhen Matte is selected i
Page 48 and 49: 4. If the T-Bar or AUTO TRANS butto
Page 52 and 53: Looping an External reference throu
Page 54 and 55: Tally connection to two ITC-100 uni
Page 56 and 57: RS-422 INThis connector has no func
Page 58 and 59: NOTE: Once started the update proce
Page 60: Service and SupportIt is our goal t

download datavideo se-3000-8 product manual - Go Electronic

Create successful ePaper yourself

Delete template?

Save as template?