download datavideo se-3000-8 product manual - Go Electronic

More documents

Recommendations

Info

Looping an External reference through the SE-3000The SE-3000’s built in TBCs can synchronise the input channels internally without the need forexternal genlock. However, you can choose to loop an external reference through the SE-3000 ifyou wish using the REF IN and REF LOOP (OUT) BNC connections provided on the rear of theMain unit.Once the BNC connections have been made and the external reference is supplied follow the instructionsbelow.Press the SETUP button in the Menus button group on the Control Panel / Keyboard.Now look at the Touch Screen Menu Panel.Tap on Genlock in the Yellow menu list and the screen options below will be shown.Tap on Analog Ref to select it as the Genlock Source and tap below Enable to show On.Alternatively an Input from 1 to 8 could be chosen as the reference source instead.52
Tally OutputThe SE-3000 has a 37pin D-Sub Tally Output port. These ports provide bi-colour tally information to anumber of other Datavideo products, such as the ITC-100 8 Channel Talkback system and TLM-434H LCDMonitor.The output signals from the tally output pins are for lighting tally lamps, and these outputs are open collectoroutputs.Input/channel PGM / Red LED Preset / Yellow LED1 Pin 4 Pin 22 Pin 8 Pin 63 Pin 12 Pin 104 Pin 16 Pin 145 Pin 20 Pin 186 Pin 24 Pin 227 Pin 28 Pin 268 Pin 32 Pin 309 Pin 31 Pin 3410 Pin 27 Pin 2911 Pin 23 Pin 2512 Pin 19 Pin 2113 Pin 15 Pin 1714 Pin 11 Pin 1315 Pin 7 Pin 916 Pin 3 Pin 5SE-3000 Pin 2 to 32 and 34 must satisfy the following conditions: Dielectric strength: Max. DC 24VCurrent:Max. 50mASE-3000 Pin 1 is RESERVED and should be left unconnected. SE-3000 Pins 33, 35, 36 and 37 are Ground.Example of tally connections(Max. voltage:24V)VCCSE-3000TALLY OUTPUT21R1 2(Max. current: 50mA)Tally LEDGround53
Page 1 and 2: .8 / 16 CHANNEL SWITCHER.SE-3000Ins
Page 4 and 5: The Rotation value ................
Page 6 and 7: Warnings and Precautions1. Read all
Page 8 and 9: IntroductionThe Datavideo SE-3000 i
Page 10 and 11: Main UnitFront PanelThe front panel
Page 12 and 13: Starting from the Top left cornerXL
Page 14 and 15: Video ConnectionsSDI Video InputsLo
Page 16 and 17: Video OutputsThe SE-3000 has many v
Page 18 and 19: The bottom of the screen now shows
Page 20 and 21: Source Select Button GroupThis grou
Page 22 and 23: WIPE Selection MenuThere are 30+ di
Page 24 and 25: Wipe ShadeNote: In order for the Wi
Page 26 and 27: Is the value used by the FTB or Fad
Page 28 and 29: within the Stills display under the
Page 30 and 31: Storing and Recalling USER Set UpsT
Page 32 and 33: Flex screen orderThe Flex screen is
Page 34 and 35: The Z value changes the size and po
Page 36 and 37: Flex Key and Fill Example CG-350 Se
Page 38 and 39: LightingLighting of your chosen gre
Page 40 and 41: the key using the Chroma Key Ctrlan
Page 42 and 43: Color SpillThe Color Spill options
Page 44 and 45: effects of Lift, Gain, Opacity andI
Page 46 and 47: Keyer MatteWhen Matte is selected i
Page 48 and 49: 4. If the T-Bar or AUTO TRANS butto
Page 50 and 51: Saving the DSK1 DSK2 set upOnce you
Page 54 and 55: Tally connection to two ITC-100 uni
Page 56 and 57: RS-422 INThis connector has no func
Page 58 and 59: NOTE: Once started the update proce
Page 60: Service and SupportIt is our goal t

download datavideo se-3000-8 product manual - Go Electronic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?