download datavideo se-3000-8 product manual - Go Electronic

SE-3000 Pin 1 is RESERVED and should be left unconnected. SE-3000 Pins 33, 35, 36 and 37 are Ground.Features awaiting firmware developmentClip MenuThis menu has no function, as yet.This feature is not active within the current version of firmware. Please check with your local DatavideoOffice for firmware updates and a PDF copy of the latest manual.Audio MenuThis menu has no function, as yetThis feature is not active within the current version of firmware. Please check with your local DatavideoOffice for firmware updates and a PDF copy of the latest manual.GPI connectionThis connector has no function, as yetThis feature is not active within the current version of firmware. Please check with your local DatavideoOffice for firmware updates and a PDF copy of the latest manual.PIN1: GPI IN 1PIN3: GPI IN 2PIN5: GPI IN 3PIN7: GPI IN 4PIN9: GPI IN 5PIN11: GPI IN 6PIN13: GPI IN 7PIN15: GPI IN 8PIN14: GPI OUTPIN2: GNDPIN4: GNDPIN6: GNDPIN8: GNDPIN10: GNDPIN12: GNDRS-232This connector has no function, as yetThe SE-3000 features a 9pin D-Sub RS-232 port which is located on the rear panel of the Main unit.This port is not active within the current version of firmware. Please check with your local Datavideo Officefor firmware updates and a PDF copy of the control protocol.PinSE-3000 Signal12 Transmit (TX-)3 Receive (RX+)45 Ground6789- Speed 9600bps- 8 Bits- 1 stop bit55