download datavideo se-3000-8 product manual - Go Electronic

More documents

Recommendations

Info

NOTE: Once started the update process should not be interrupted in any way as this could result in anon-responsive unit.Checking Firmware RevisionsTo check the software revision for the SE-<strong>3000</strong>, press the SETUP button within the Menus area of theControl Panel / Keyboard. Then look at theTouch Screen Menu Panel which shoulddisplay the information required.Plea<strong>se</strong> check with your local Datavideo office ifyou feel that your unit is not on the latestversion of software.Drawing Control Panel & Main UnitAll dimensions in mm.58
SpecificationsVideo formatSDI/HD-SDI SpecificationsStandardHigh DefinitionSD (480/59.94i, 576/50i),HD (1080/59.94i, 1080/50i, 720/59.94p, 720/50p)Y:Cb:Cr, 4:2:2 10 bit RGB, 4:4:4 8 bitSMPTE 259M-C (270 Mbps, 525/625 component video)SMPTE 292M (1.485, 1.485/1.001 Gbps)ConnectorBNC (IEC169-8)Impedance75 ohmsReturn LossHD >15dB(5 MHz to 750 MHz), >10dB(750 MHz to 1.5 GHz)SD >15dB(5 MHz to 270 MHz)Equalization265 m Belden 8281 cable at 270 Mbps;135 m (typical) of Belden 1694A at 1.485 GbpsOperating temp.0 ˚C to +40 ˚CHumidity10% to 90% (non condensing)Power Main Unit 12V 10AControl Panel 12V 3ADimensionsMain Unit???(W) x ???(H) x ???(D) (mm)Control Panel???(W) x ???(H) x ???(D) (mm)Weight Main Unit ??KGControl Panel ??KGCombined (Nett) ??KGPackaged (Gross) ??KGSpecification in this document is subject to change without notice due to planned improvements.59
Page 1 and 2:
.8 / 16 CHANNEL SWITCHER.SE-3000Ins
Page 4 and 5:
The Rotation value ................
Page 6 and 7:
Warnings and Precautions1. Read all
Page 8 and 9: IntroductionThe Datavideo SE-3000 i
Page 10 and 11: Main UnitFront PanelThe front panel
Page 12 and 13: Starting from the Top left cornerXL
Page 14 and 15: Video ConnectionsSDI Video InputsLo
Page 16 and 17: Video OutputsThe SE-3000 has many v
Page 18 and 19: The bottom of the screen now shows
Page 20 and 21: Source Select Button GroupThis grou
Page 22 and 23: WIPE Selection MenuThere are 30+ di
Page 24 and 25: Wipe ShadeNote: In order for the Wi
Page 26 and 27: Is the value used by the FTB or Fad
Page 28 and 29: within the Stills display under the
Page 30 and 31: Storing and Recalling USER Set UpsT
Page 32 and 33: Flex screen orderThe Flex screen is
Page 34 and 35: The Z value changes the size and po
Page 36 and 37: Flex Key and Fill Example CG-350 Se
Page 38 and 39: LightingLighting of your chosen gre
Page 40 and 41: the key using the Chroma Key Ctrlan
Page 42 and 43: Color SpillThe Color Spill options
Page 44 and 45: effects of Lift, Gain, Opacity andI
Page 46 and 47: Keyer MatteWhen Matte is selected i
Page 48 and 49: 4. If the T-Bar or AUTO TRANS butto
Page 50 and 51: Saving the DSK1 DSK2 set upOnce you
Page 52 and 53: Looping an External reference throu
Page 54 and 55: Tally connection to two ITC-100 uni
Page 56 and 57: RS-422 INThis connector has no func
Page 60: Service and SupportIt is our goal t
show all

download datavideo se-3000-8 product manual - Go Electronic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?