download datavideo se-3000-8 product manual - Go Electronic

More documents

Recommendations

Info

RS-422 INThis connector has no function, as yetThe SE-3000 features a 9pin D-Sub RS-422 IN port which is located on the rear panel of the Main unit.This port is not active within the current version of firmware. Please check with your local Datavideo Officefor firmware updates and a PDF copy of the control protocol.PinSE-3000 Signal1 Frame Ground2 Transmit Z (TX-)3 Receive A (RX+)4567 Transmit Y (TX+)8 Receive B (RX-)9 Ground- Speed 9600bps- 8 Bits- 1 stop bitRS-422 OUTThis connector has no function, as yetThe SE-3000 features a 9pin D-Sub RS-422 OUT port which is located on the rear panel of the Main unit.This port is not active within the current version of firmware. Please check with your local Datavideo Officefor firmware updates and a PDF copy of the control protocol.PinSE-3000 Signal1 Frame Ground2 Receive B (RX-)3 Transmit Y (TX+)4567 Receive A (RX+)8 Transmit Z (TX-)9 Ground- Speed 9600bps- 8 Bits- 1 stop bit56
Updating the SE-3000 firmwareFrom time to time Datavideo may release new firmware to either add new features or to fix reported bugs inthe current SE-3000 firmware. Customers can update the SE-3000 firmware themselves if they wish or theycan contact their local dealer or reseller for assistance should they prefer this method.This page describes the firmware update process, if you have all the items required it should takeapproximately 15 minutes total time to complete.NOTE: Once started the update process should not be interrupted in any way as this could result in anon-responsive unit.As well as a working SE-3000 you will need:• The latest zip file Firmware update for the SE-3000 from your local Datavideo office or dealer.• The SE-3000 power supplies.• An empty and anti-virus checked USB pen drive (128 MB minimum free space required).• USB 2.0 male A to female A cable, to connect the USB pen drive to the SE-3000 Main unit.• A Windows PC or Mac.To update the SE-3000 firmware:1. Unzip the Datavideo supplied file called se3000_xxxxxx to the PC/Mac Desktop so theunzipped folder and files are easy to locate. (xxxxxx = the latest version number/date)2. Within this unzipped folder you are looking for four items. Two folders, one called Se3000Panel and one called Se3000 Processor. The other two items will be Windows batch files,one called se3000_CP_usb_startup and one called se3000_PU_usb_startup.3. Copy these 4 items (and their contents) into a new folder on the empty USB pen drivecalled se3000.4. Switch OFF the SE-3000 in the normal way and remove the front ventilation plate on theMain unit using the four thumb screws.5. Below the Main Unit’s Power On button you will see two USB ports. Insert the USB pen driveinto the lower port, gently. If the USB pen drive will not fit easily due to its case shape/sizethen use the optional USB 2.0 Male to Female cable to make connecting the USB pen driveeasier.6. Now power on the SE-3000 in the normal way. The Main Unit should see the USB pen driveand will auto update using the se3000_PU_usb_startup batch file. The unit will havecompleted the first part of the update process when the Multi-view images appear on theconnected monitor(s).7. Power down the SE-3000. Remove the USB pen drive (or any optional USB cabling) fromthe Main unit. Refit and secure the ventilation plate to the Main unit.8. Now connect the USB pen drive to the USB port on the right hand side of the LCD touchscreen.9. Now power on the SE-3000 in the normal way. The Control Panel should see the USB pendrive and will auto update using the se3000_CP_usb_startup batch file. The unit will havecompleted the second part of update process when the Multi-view images appear on themonitors.10. Press the SET UP button in the MENUS area of the Control Panel and check the FirmwareRevisions displayed. That’s it, done!57
Page 1 and 2:
.8 / 16 CHANNEL SWITCHER.SE-3000Ins
Page 4 and 5:
The Rotation value ................
Page 6 and 7: Warnings and Precautions1. Read all
Page 8 and 9: IntroductionThe Datavideo SE-3000 i
Page 10 and 11: Main UnitFront PanelThe front panel
Page 12 and 13: Starting from the Top left cornerXL
Page 14 and 15: Video ConnectionsSDI Video InputsLo
Page 16 and 17: Video OutputsThe SE-3000 has many v
Page 18 and 19: The bottom of the screen now shows
Page 20 and 21: Source Select Button GroupThis grou
Page 22 and 23: WIPE Selection MenuThere are 30+ di
Page 24 and 25: Wipe ShadeNote: In order for the Wi
Page 26 and 27: Is the value used by the FTB or Fad
Page 28 and 29: within the Stills display under the
Page 30 and 31: Storing and Recalling USER Set UpsT
Page 32 and 33: Flex screen orderThe Flex screen is
Page 34 and 35: The Z value changes the size and po
Page 36 and 37: Flex Key and Fill Example CG-350 Se
Page 38 and 39: LightingLighting of your chosen gre
Page 40 and 41: the key using the Chroma Key Ctrlan
Page 42 and 43: Color SpillThe Color Spill options
Page 44 and 45: effects of Lift, Gain, Opacity andI
Page 46 and 47: Keyer MatteWhen Matte is selected i
Page 48 and 49: 4. If the T-Bar or AUTO TRANS butto
Page 50 and 51: Saving the DSK1 DSK2 set upOnce you
Page 52 and 53: Looping an External reference throu
Page 54 and 55: Tally connection to two ITC-100 uni
Page 58 and 59: NOTE: Once started the update proce
Page 60: Service and SupportIt is our goal t
show all

download datavideo se-3000-8 product manual - Go Electronic

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?